From 16fba89b38dac0263239029735d317582e3da8c3 Mon Sep 17 00:00:00 2001
From: Jan Travnicek <Jan.Travnicek@fit.cvut.cz>
Date: Mon, 28 Apr 2014 09:49:34 +0200
Subject: [PATCH] add uncrustify formater config

---
 uncrustify.cfg | 1596 ++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 1596 insertions(+)
 create mode 100644 uncrustify.cfg

diff --git a/uncrustify.cfg b/uncrustify.cfg
new file mode 100644
index 0000000000..6e3c2c4615
--- /dev/null
+++ b/uncrustify.cfg
@@ -0,0 +1,1596 @@
+# Uncrustify 0.60
+
+#
+# General options
+#
+
+# The type of line endings
+newlines = lf # auto / lf / crlf / cr
+
+# The original size of tabs in the input
+ input_tab_size = 8 # number
+
+# The size of tabs in the output (only used if align_with_tabs=true)
+ output_tab_size = 3 # number
+
+# The ASCII value of the string escape char, usually 92 (\) or 94 (^). (Pawn)
+ string_escape_char = 92 # number
+
+# Alternate string escape char for Pawn. Only works right before the quote char.
+ string_escape_char2 = 0 # number
+
+# Allow interpreting '>=' and '>>=' as part of a template in 'void f(list<list<B>>=val);'.
+# If true (default), 'assert(x<0 && y>=3)' will be broken.
+# Improvements to template detection may make this option obsolete.
+ tok_split_gte = false # false / true
+
+# Control what to do with the UTF-8 BOM (recommend 'remove')
+ utf8_bom = remove # ignore / add / remove / force
+
+# If the file contains bytes with values between 128 and 255, but is not UTF-8, then output as UTF-8
+ utf8_byte = false # false / true
+
+# Force the output encoding to UTF-8
+ utf8_force = false # false / true
+
+#
+# Indenting
+#
+
+# The number of columns to indent per level.
+# Usually 2, 3, 4, or 8.
+ indent_columns = 3 # number
+
+# The continuation indent. If non-zero, this overrides the indent of '(' and '=' continuation indents.
+# For FreeBSD, this is set to 4. Negative value is absolute and not increased for each ( level
+ indent_continue = 0 # number
+
+# How to use tabs when indenting code
+# 0 =spaces only
+# 1 =indent with tabs to brace level, align with spaces
+# 2 =indent and align with tabs, using spaces when not on a tabstop
+ indent_with_tabs = 1 # number
+
+# Comments that are not a brace level are indented with tabs on a tabstop.
+# Requires indent_with_tabs=2. If false, will use spaces.
+ indent_cmt_with_tabs = false # false / true
+
+# Whether to indent strings broken by '\' so that they line up
+ indent_align_string = true # false / true
+
+# The number of spaces to indent multi-line XML strings.
+# Requires indent_align_string=True
+ indent_xml_string = 0 # number
+
+# Spaces to indent '{' from level
+ indent_brace = 0 # number
+
+# Whether braces are indented to the body level
+ indent_braces = false # false / true
+
+# Disabled indenting function braces if indent_braces is true
+ indent_braces_no_func = false # false / true
+
+# Disabled indenting class braces if indent_braces is true
+ indent_braces_no_class = false # false / true
+
+# Disabled indenting struct braces if indent_braces is true
+ indent_braces_no_struct = false # false / true
+
+# Indent based on the size of the brace parent, i.e. 'if' => 3 spaces, 'for' => 4 spaces, etc.
+ indent_brace_parent = false # false / true
+
+# Whether the 'namespace' body is indented
+ indent_namespace = false # false / true
+
+# The number of spaces to indent a namespace block
+ indent_namespace_level = 0 # number
+
+# If the body of the namespace is longer than this number, it won't be indented.
+# Requires indent_namespace=true. Default=0 (no limit)
+ indent_namespace_limit = 0 # number
+
+# Whether the 'extern "C"' body is indented
+ indent_extern = false # false / true
+
+# Whether the 'class' body is indented
+ indent_class = true # false / true
+
+# Whether to indent the stuff after a leading class colon
+ indent_class_colon = true # false / true
+
+# Virtual indent from the ':' for member initializers. Default is 2
+ indent_ctor_init_leading = 2 # number
+
+# Additional indenting for constructor initializer list
+ indent_ctor_init = 0 # number
+
+# False =treat 'else\nif' as 'else if' for indenting purposes
+# True =indent the 'if' one level
+ indent_else_if = false # false / true
+
+# Amount to indent variable declarations after a open brace. neg=relative, pos=absolute
+ indent_var_def_blk = 0 # number
+
+# Indent continued variable declarations instead of aligning.
+ indent_var_def_cont = false # false / true
+
+# True : force indentation of function definition to start in column 1
+# False : use the default behavior
+ indent_func_def_force_col1 = false # false / true
+
+# True : indent continued function call parameters one indent level
+# False : align parameters under the open paren
+ indent_func_call_param = false # false / true
+
+# Same as indent_func_call_param, but for function defs
+ indent_func_def_param = false # false / true
+
+# Same as indent_func_call_param, but for function protos
+ indent_func_proto_param = false # false / true
+
+# Same as indent_func_call_param, but for class declarations
+ indent_func_class_param = false # false / true
+
+# Same as indent_func_call_param, but for class variable constructors
+ indent_func_ctor_var_param = false # false / true
+
+# Same as indent_func_call_param, but for templates
+ indent_template_param = false # false / true
+
+# Double the indent for indent_func_xxx_param options
+ indent_func_param_double = false # false / true
+
+# Indentation column for standalone 'const' function decl/proto qualifier
+ indent_func_const = 0 # number
+
+# Indentation column for standalone 'throw' function decl/proto qualifier
+ indent_func_throw = 0 # number
+
+# The number of spaces to indent a continued '->' or '.'
+# Usually set to 0, 1, or indent_columns.
+ indent_member = 3 # number
+
+# Spaces to indent single line (' // ') comments on lines before code
+ indent_sing_line_comments = 1 # number
+
+# If set, will indent trailing single line (' // ') comments relative
+# to the code instead of trying to keep the same absolute column
+ indent_relative_single_line_comments = true # false / true
+
+# Spaces to indent 'case' from 'switch'
+# Usually 0 or indent_columns.
+ indent_switch_case = 0 # number
+
+# Spaces to shift the 'case' line, without affecting any other lines
+# Usually 0.
+ indent_case_shift = 0 # number
+
+# Spaces to indent '{' from 'case'.
+# By default, the brace will appear under the 'c' in case.
+# Usually set to 0 or indent_columns.
+ indent_case_brace = 3 # number
+
+# Whether to indent comments found in first column
+ indent_col1_comment = true # false / true
+
+# How to indent goto labels
+# > 0 : absolute column where 1 is the leftmost column
+# <= 0 : subtract from brace indent
+ indent_label = 1 # number
+
+# Same as indent_label, but for access specifiers that are followed by a colon
+ indent_access_spec = 1 # number
+
+# Indent the code after an access specifier by one level.
+# If set, this option forces 'indent_access_spec=0'
+ indent_access_spec_body = false # false / true
+
+# If an open paren is followed by a newline, indent the next line so that it lines up after the open paren (not recommended)
+ indent_paren_nl = false # false / true
+
+# Controls the indent of a close paren after a newline.
+# 0 : Indent to body level
+# 1 : Align under the open paren
+# 2 : Indent to the brace level
+ indent_paren_close = 0 # number
+
+# Controls the indent of a comma when inside a paren.If TRUE, aligns under the open paren
+ indent_comma_paren = false # false / true
+
+# Controls the indent of a BOOL operator when inside a paren.If TRUE, aligns under the open paren
+ indent_bool_paren = false # false / true
+
+# If 'indent_bool_paren' is true, controls the indent of the first expression. If TRUE, aligns the first expression to the following ones
+ indent_first_bool_expr = false # false / true
+
+# If an open square is followed by a newline, indent the next line so that it lines up after the open square (not recommended)
+ indent_square_nl = false # false / true
+
+# Don 't change the relative indent of ESQL/C 'EXEC SQL' bodies
+ indent_preserve_sql = false # false / true
+
+# Align continued statements at the '='. Default=True
+# If FALSE or the '=' is followed by a newline, the next line is indent one tab.
+ indent_align_assign = true # false / true
+
+# Indent OC blocks at brace level instead of usual rules.
+ indent_oc_block = false # false / true
+
+# Indent OC blocks in a message relative to the parameter name.
+# 0 =use indent_oc_block rules, 1+=spaces to indent
+ indent_oc_block_msg = 0 # number
+
+# Minimum indent for subsequent parameters
+ indent_oc_msg_colon = 0 # number
+
+#
+# Spacing options
+#
+
+# Add or remove space around arithmetic operator '+', '-', '/', '*', etc
+ sp_arith = force # ignore / add / remove / force
+
+# Add or remove space around assignment operator '=', '+=', etc
+ sp_assign = force # ignore / add / remove / force
+
+# Add or remove space around '=' in C++11 lambda capture specifications. Overrides sp_assign
+ sp_cpp_lambda_assign = remove # ignore / add / remove / force
+
+# Add or remove space after the capture specification in C++11 lambda.
+ sp_cpp_lambda_paren = add # ignore / add / remove / force
+
+# Add or remove space around assignment operator '=' in a prototype
+ sp_assign_default = add # ignore / add / remove / force
+
+# Add or remove space before assignment operator '=', '+=', etc. Overrides sp_assign.
+ sp_before_assign = add # ignore / add / remove / force
+
+# Add or remove space after assignment operator '=', '+=', etc. Overrides sp_assign.
+ sp_after_assign = add # ignore / add / remove / force
+
+# Add or remove space around assignment '=' in enum
+ sp_enum_assign = add # ignore / add / remove / force
+
+# Add or remove space before assignment '=' in enum. Overrides sp_enum_assign.
+ sp_enum_before_assign = ignore # ignore / add / remove / force
+
+# Add or remove space after assignment '=' in enum. Overrides sp_enum_assign.
+ sp_enum_after_assign = ignore # ignore / add / remove / force
+
+# Add or remove space around preprocessor '##' concatenation operator. Default=Add
+ sp_pp_concat = add # ignore / add / remove / force
+
+# Add or remove space after preprocessor '#' stringify operator. Also affects the '#@' charizing operator. Default=Add
+ sp_pp_stringify = add # ignore / add / remove / force
+
+# Add or remove space before preprocessor '#' stringify operator as in '#define x(y) L#y'.
+ sp_before_pp_stringify = ignore # ignore / add / remove / force
+
+# Add or remove space around boolean operators '&&' and '||'
+ sp_bool = force # ignore / add / remove / force
+
+# Add or remove space around compare operator '<', '>', '==', etc
+ sp_compare = force # ignore / add / remove / force
+
+# Add or remove space inside '(' and ')'
+ sp_inside_paren = force # ignore / add / remove / force
+
+# Add or remove space between nested parens: '((' vs ') )'
+ sp_paren_paren = add # ignore / add / remove / force
+
+# Add or remove space between back-to-back parens: ')(' vs ') ('
+ sp_cparen_oparen = ignore # ignore / add / remove / force
+
+# Whether to balance spaces inside nested parens
+ sp_balance_nested_parens = false # false / true
+
+# Add or remove space between ')' and '{'
+ sp_paren_brace = add # ignore / add / remove / force
+
+# Add or remove space before pointer star '*'
+ sp_before_ptr_star = add # ignore / add / remove / force
+
+# Add or remove space before pointer star '*' that isn't followed by a variable name
+# If set to 'ignore', sp_before_ptr_star is used instead.
+ sp_before_unnamed_ptr_star = add # ignore / add / remove / force
+
+# Add or remove space between pointer stars '*'
+ sp_between_ptr_star = remove # ignore / add / remove / force
+
+# Add or remove space after pointer star '*', if followed by a word.
+ sp_after_ptr_star = remove # ignore / add / remove / force
+
+# Add or remove space after a pointer star '*', if followed by a func proto/def.
+ sp_after_ptr_star_func = add # ignore / add / remove / force
+
+# Add or remove space after a pointer star '*', if followed by an open paren (function types).
+ sp_ptr_star_paren = ignore # ignore / add / remove / force
+
+# Add or remove space before a pointer star '*', if followed by a func proto/def.
+ sp_before_ptr_star_func = add # ignore / add / remove / force
+
+# Add or remove space before a reference sign '&'
+ sp_before_byref = add # ignore / add / remove / force
+
+# Add or remove space before a reference sign '&' that isn't followed by a variable name
+# If set to 'ignore', sp_before_byref is used instead.
+ sp_before_unnamed_byref = add # ignore / add / remove / force
+
+# Add or remove space after reference sign '&', if followed by a word.
+ sp_after_byref = add # ignore / add / remove / force
+
+# Add or remove space after a reference sign '&', if followed by a func proto/def.
+ sp_after_byref_func = add # ignore / add / remove / force
+
+# Add or remove space before a reference sign '&', if followed by a func proto/def.
+ sp_before_byref_func = add # ignore / add / remove / force
+
+# Add or remove space between type and word. Default=Force
+ sp_after_type = force # ignore / add / remove / force
+
+# Add or remove space before the paren in the D constructs 'template Foo(' and 'class Foo('.
+ sp_before_template_paren = ignore # ignore / add / remove / force
+
+# Add or remove space in 'template <' vs 'template<'.
+# If set to ignore, sp_before_angle is used.
+ sp_template_angle = ignore # ignore / add / remove / force
+
+# Add or remove space before '<>'
+ sp_before_angle = remove # ignore / add / remove / force
+
+# Add or remove space inside '<' and '>'
+ sp_inside_angle = remove # ignore / add / remove / force
+
+# Add or remove space after '<>'
+ sp_after_angle = force # ignore / add / remove / force
+
+# Add or remove space between '<>' and '(' as found in 'new List<byte>();'
+ sp_angle_paren = ignore # ignore / add / remove / force
+
+# Add or remove space between '<>' and a word as in 'List<byte> m;'
+ sp_angle_word = ignore # ignore / add / remove / force
+
+# Add or remove space between '>' and '>' in '>>' (template stuff C++/C# only). Default=Add
+ sp_angle_shift = add # ignore / add / remove / force
+
+# Permit removal of the space between '>>' in 'foo<bar<int> >' (C++11 only). Default=False
+# sp_angle_shift cannot remove the space without this option.
+ sp_permit_cpp11_shift = false # false / true
+
+# Add or remove space before '(' of 'if', 'for', 'switch', and 'while'
+ sp_before_sparen = force # ignore / add / remove / force
+
+# Add or remove space inside if-condition '(' and ')'
+ sp_inside_sparen = add # ignore / add / remove / force
+
+# Add or remove space before if-condition ')'. Overrides sp_inside_sparen.
+ sp_inside_sparen_close = add # ignore / add / remove / force
+
+# Add or remove space before if-condition '('. Overrides sp_inside_sparen.
+ sp_inside_sparen_open = ignore # ignore / add / remove / force
+
+# Add or remove space after ')' of 'if', 'for', 'switch', and 'while'
+ sp_after_sparen = force # ignore / add / remove / force
+
+# Add or remove space between ')' and '{' of 'if', 'for', 'switch', and 'while'
+ sp_sparen_brace = add # ignore / add / remove / force
+
+# Add or remove space between 'invariant' and '(' in the D language.
+ sp_invariant_paren = ignore # ignore / add / remove / force
+
+# Add or remove space after the ')' in 'invariant (C) c' in the D language.
+ sp_after_invariant_paren = ignore # ignore / add / remove / force
+
+# Add or remove space before empty statement ';' on 'if', 'for' and 'while'
+ sp_special_semi = ignore # ignore / add / remove / force
+
+# Add or remove space before ';'. Default=Remove
+ sp_before_semi = remove # ignore / add / remove / force
+
+# Add or remove space before ';' in non-empty 'for' statements
+ sp_before_semi_for = ignore # ignore / add / remove / force
+
+# Add or remove space before a semicolon of an empty part of a for statement.
+ sp_before_semi_for_empty = force # ignore / add / remove / force
+
+# Add or remove space after ';', except when followed by a comment. Default=Add
+ sp_after_semi = add # ignore / add / remove / force
+
+# Add or remove space after ';' in non-empty 'for' statements. Default=Force
+ sp_after_semi_for = force # ignore / add / remove / force
+
+# Add or remove space after the final semicolon of an empty part of a for statement: for ( ; ; <here> ).
+ sp_after_semi_for_empty = ignore # ignore / add / remove / force
+
+# Add or remove space before '[' (except '[]')
+ sp_before_square = ignore # ignore / add / remove / force
+
+# Add or remove space before '[]'
+ sp_before_squares = ignore # ignore / add / remove / force
+
+# Add or remove space inside a non-empty '[' and ']'
+ sp_inside_square = remove # ignore / add / remove / force
+
+# Add or remove space after ','
+ sp_after_comma = force # ignore / add / remove / force
+
+# Add or remove space before ','
+ sp_before_comma = remove # ignore / add / remove / force
+
+# Add or remove space between an open paren and comma: '(,' vs '( ,'
+ sp_paren_comma = force # ignore / add / remove / force
+
+# Add or remove space before the variadic '...' when preceded by a non-punctuator
+ sp_before_ellipsis = ignore # ignore / add / remove / force
+
+# Add or remove space after class ':'
+ sp_after_class_colon = ignore # ignore / add / remove / force
+
+# Add or remove space before class ':'
+ sp_before_class_colon = ignore # ignore / add / remove / force
+
+# Add or remove space before case ':'. Default=Remove
+ sp_before_case_colon = remove # ignore / add / remove / force
+
+# Add or remove space between 'operator' and operator sign
+ sp_after_operator = ignore # ignore / add / remove / force
+
+# Add or remove space between the operator symbol and the open paren, as in 'operator ++('
+ sp_after_operator_sym = ignore # ignore / add / remove / force
+
+# Add or remove space after C/D cast, i.e. 'cast(int)a' vs 'cast(int) a' or '(int)a' vs '(int) a'
+ sp_after_cast = remove # ignore / add / remove / force
+
+# Add or remove spaces inside cast parens
+ sp_inside_paren_cast = ignore # ignore / add / remove / force
+
+# Add or remove space between the type and open paren in a C++ cast, i.e. 'int(exp)' vs 'int (exp)'
+ sp_cpp_cast_paren = ignore # ignore / add / remove / force
+
+# Add or remove space between 'sizeof' and '('
+ sp_sizeof_paren = remove # ignore / add / remove / force
+
+# Add or remove space after the tag keyword (Pawn)
+ sp_after_tag = ignore # ignore / add / remove / force
+
+# Add or remove space inside enum '{' and '}'
+ sp_inside_braces_enum = force # ignore / add / remove / force
+
+# Add or remove space inside struct/union '{' and '}'
+ sp_inside_braces_struct = force # ignore / add / remove / force
+
+# Add or remove space inside '{' and '}'
+ sp_inside_braces = force # ignore / add / remove / force
+
+# Add or remove space inside '{}'
+ sp_inside_braces_empty = force # ignore / add / remove / force
+
+# Add or remove space between return type and function name
+# A minimum of 1 is forced except for pointer return types.
+ sp_type_func = force # ignore / add / remove / force
+
+# Add or remove space between function name and '(' on function declaration
+ sp_func_proto_paren = force # ignore / add / remove / force
+
+# Add or remove space between function name and '(' on function definition
+ sp_func_def_paren = force # ignore / add / remove / force
+
+# Add or remove space inside empty function '()'
+ sp_inside_fparens = force # ignore / add / remove / force
+
+# Add or remove space inside function '(' and ')'
+ sp_inside_fparen = force # ignore / add / remove / force
+
+# Add or remove space inside the first parens in the function type: 'void (*x)(...)'
+ sp_inside_tparen = ignore # ignore / add / remove / force
+
+# Add or remove between the parens in the function type: 'void (*x)(...)'
+ sp_after_tparen_close = ignore # ignore / add / remove / force
+
+# Add or remove space between ']' and '(' when part of a function call.
+ sp_square_fparen = ignore # ignore / add / remove / force
+
+# Add or remove space between ')' and '{' of function
+ sp_fparen_brace = force # ignore / add / remove / force
+
+# Add or remove space between function name and '(' on function calls
+ sp_func_call_paren = force # ignore / add / remove / force
+
+# Add or remove space between function name and '()' on function calls without parameters.
+# If set to 'ignore' (the default), sp_func_call_paren is used.
+ sp_func_call_paren_empty = ignore # ignore / add / remove / force
+
+# Add or remove space between the user function name and '(' on function calls
+# You need to set a keyword to be a user function, like this: 'set func_call_user _' in the config file.
+ sp_func_call_user_paren = ignore # ignore / add / remove / force
+
+# Add or remove space between a constructor/destructor and the open paren
+ sp_func_class_paren = add # ignore / add / remove / force
+
+# Add or remove space between 'return' and '('
+ sp_return_paren = remove # ignore / add / remove / force
+
+# Add or remove space between '__attribute__' and '('
+ sp_attribute_paren = add # ignore / add / remove / force
+
+# Add or remove space between 'defined' and '(' in '#if defined (FOO)'
+ sp_defined_paren = ignore # ignore / add / remove / force
+
+# Add or remove space between 'throw' and '(' in 'throw (something)'
+ sp_throw_paren = add # ignore / add / remove / force
+
+# Add or remove space between 'throw' and anything other than '(' as in '@throw [...];'
+ sp_after_throw = ignore # ignore / add / remove / force
+
+# Add or remove space between 'catch' and '(' in 'catch (something) { }'
+# If set to ignore, sp_before_sparen is used.
+ sp_catch_paren = add # ignore / add / remove / force
+
+# Add or remove space between 'version' and '(' in 'version (something) { }' (D language)
+# If set to ignore, sp_before_sparen is used.
+ sp_version_paren = ignore # ignore / add / remove / force
+
+# Add or remove space between 'scope' and '(' in 'scope (something) { }' (D language)
+# If set to ignore, sp_before_sparen is used.
+ sp_scope_paren = ignore # ignore / add / remove / force
+
+# Add or remove space between macro and value
+ sp_macro = ignore # ignore / add / remove / force
+
+# Add or remove space between macro function ')' and value
+ sp_macro_func = ignore # ignore / add / remove / force
+
+# Add or remove space between 'else' and '{' if on the same line
+ sp_else_brace = force # ignore / add / remove / force
+
+# Add or remove space between '}' and 'else' if on the same line
+ sp_brace_else = force # ignore / add / remove / force
+
+# Add or remove space between '}' and the name of a typedef on the same line
+ sp_brace_typedef = force # ignore / add / remove / force
+
+# Add or remove space between 'catch' and '{' if on the same line
+ sp_catch_brace = force # ignore / add / remove / force
+
+# Add or remove space between '}' and 'catch' if on the same line
+ sp_brace_catch = force # ignore / add / remove / force
+
+# Add or remove space between 'finally' and '{' if on the same line
+ sp_finally_brace = force # ignore / add / remove / force
+
+# Add or remove space between '}' and 'finally' if on the same line
+ sp_brace_finally = force # ignore / add / remove / force
+
+# Add or remove space between 'try' and '{' if on the same line
+ sp_try_brace = force # ignore / add / remove / force
+
+# Add or remove space between get/set and '{' if on the same line
+ sp_getset_brace = force # ignore / add / remove / force
+
+# Add or remove space between a variable and '{' for C++ uniform initialization
+ sp_word_brace = add # ignore / add / remove / force
+
+# Add or remove space between a variable and '{' for a namespace
+ sp_word_brace_ns = add # ignore / add / remove / force
+
+# Add or remove space before the '::' operator
+ sp_before_dc = remove # ignore / add / remove / force
+
+# Add or remove space after the '::' operator
+ sp_after_dc = remove # ignore / add / remove / force
+
+# Add or remove around the D named array initializer ':' operator
+ sp_d_array_colon = ignore # ignore / add / remove / force
+
+# Add or remove space after the '!' (not) operator. Default=Remove
+ sp_not = remove # ignore / add / remove / force
+
+# Add or remove space after the '~' (invert) operator. Default=Remove
+ sp_inv = remove # ignore / add / remove / force
+
+# Add or remove space after the '&' (address-of) operator. Default=Remove
+# This does not affect the spacing after a '&' that is part of a type.
+ sp_addr = remove # ignore / add / remove / force
+
+# Add or remove space around the '.' or '->' operators. Default=Remove
+ sp_member = remove # ignore / add / remove / force
+
+# Add or remove space after the '*' (dereference) operator. Default=Remove
+# This does not affect the spacing after a '*' that is part of a type.
+ sp_deref = remove # ignore / add / remove / force
+
+# Add or remove space after '+' or '-', as in 'x = -5' or 'y = +7'. Default=Remove
+ sp_sign = remove # ignore / add / remove / force
+
+# Add or remove space before or after '++' and '--', as in '(--x)' or 'y++;'. Default=Remove
+ sp_incdec = remove # ignore / add / remove / force
+
+# Add or remove space before a backslash-newline at the end of a line. Default=Add
+ sp_before_nl_cont = add # ignore / add / remove / force
+
+# Add or remove space after the scope '+' or '-', as in '-(void) foo;' or '+(int) bar;'
+ sp_after_oc_scope = ignore # ignore / add / remove / force
+
+# Add or remove space after the colon in message specs
+# '-(int) f:(int) x;' vs '-(int) f: (int) x;'
+ sp_after_oc_colon = ignore # ignore / add / remove / force
+
+# Add or remove space before the colon in message specs
+# '-(int) f: (int) x;' vs '-(int) f : (int) x;'
+ sp_before_oc_colon = ignore # ignore / add / remove / force
+
+# Add or remove space after the colon in immutable dictionary expression
+# 'NSDictionary *test = @{@"foo" :@"bar"};'
+ sp_after_oc_dict_colon = ignore # ignore / add / remove / force
+
+# Add or remove space before the colon in immutable dictionary expression
+# 'NSDictionary *test = @{@"foo" :@"bar"};'
+ sp_before_oc_dict_colon = ignore # ignore / add / remove / force
+
+# Add or remove space after the colon in message specs
+# '[object setValue:1];' vs '[object setValue: 1];'
+ sp_after_send_oc_colon = ignore # ignore / add / remove / force
+
+# Add or remove space before the colon in message specs
+# '[object setValue:1];' vs '[object setValue :1];'
+ sp_before_send_oc_colon = ignore # ignore / add / remove / force
+
+# Add or remove space after the (type) in message specs
+# '-(int)f: (int) x;' vs '-(int)f: (int)x;'
+ sp_after_oc_type = ignore # ignore / add / remove / force
+
+# Add or remove space after the first (type) in message specs
+# '-(int) f:(int)x;' vs '-(int)f:(int)x;'
+ sp_after_oc_return_type = ignore # ignore / add / remove / force
+
+# Add or remove space between '@selector' and '('
+# '@selector(msgName)' vs '@selector (msgName)'
+# Also applies to @protocol() constructs
+ sp_after_oc_at_sel = ignore # ignore / add / remove / force
+
+# Add or remove space between '@selector(x)' and the following word
+# '@selector(foo) a:' vs '@selector(foo)a:'
+ sp_after_oc_at_sel_parens = ignore # ignore / add / remove / force
+
+# Add or remove space inside '@selector' parens
+# '@selector(foo)' vs '@selector( foo )'
+# Also applies to @protocol() constructs
+ sp_inside_oc_at_sel_parens = ignore # ignore / add / remove / force
+
+# Add or remove space before a block pointer caret
+# '^int (int arg){...}' vs. ' ^int (int arg){...}'
+ sp_before_oc_block_caret = ignore # ignore / add / remove / force
+
+# Add or remove space after a block pointer caret
+# '^int (int arg){...}' vs. '^ int (int arg){...}'
+ sp_after_oc_block_caret = ignore # ignore / add / remove / force
+
+# Add or remove space between the receiver and selector in a message.
+# '[receiver selector ...]'
+ sp_after_oc_msg_receiver = ignore # ignore / add / remove / force
+
+# Add or remove space after @property.
+ sp_after_oc_property = ignore # ignore / add / remove / force
+
+# Add or remove space around the ':' in 'b ? t : f'
+ sp_cond_colon = force # ignore / add / remove / force
+
+# Add or remove space around the '?' in 'b ? t : f'
+ sp_cond_question = force # ignore / add / remove / force
+
+# Fix the spacing between 'case' and the label. Only 'ignore' and 'force' make sense here.
+ sp_case_label = ignore # ignore / add / remove / force
+
+# Control the space around the D '..' operator.
+ sp_range = ignore # ignore / add / remove / force
+
+# Control the spacing after ':' in 'for (TYPE VAR : EXPR)' (Java)
+ sp_after_for_colon = ignore # ignore / add / remove / force
+
+# Control the spacing before ':' in 'for (TYPE VAR : EXPR)' (Java)
+ sp_before_for_colon = ignore # ignore / add / remove / force
+
+# Control the spacing in 'extern (C)' (D)
+ sp_extern_paren = ignore # ignore / add / remove / force
+
+# Control the space after the opening of a C++ comment ' // A' vs '//A'
+ sp_cmt_cpp_start = force # ignore / add / remove / force
+
+# Controls the spaces between #else or #endif and a trailing comment
+ sp_endif_cmt = ignore # ignore / add / remove / force
+
+# Controls the spaces after 'new', 'delete', and 'delete[]'
+ sp_after_new = force # ignore / add / remove / force
+
+# Controls the spaces before a trailing or embedded comment
+ sp_before_tr_emb_cmt = ignore # ignore / add / remove / force
+
+# Number of spaces before a trailing or embedded comment
+ sp_num_before_tr_emb_cmt = 1 # number
+
+# Control space between a Java annotation and the open paren.
+ sp_annotation_paren = ignore # ignore / add / remove / force
+
+#
+# Code alignment (not left column spaces/tabs)
+#
+
+# Whether to keep non-indenting tabs
+ align_keep_tabs = false # false / true
+
+# Whether to use tabs for aligning
+ align_with_tabs = false # false / true
+
+# Whether to bump out to the next tab when aligning
+ align_on_tabstop = false # false / true
+
+# Whether to left-align numbers
+ align_number_left = true # false / true
+
+# Whether to keep whitespace not required for alignment.
+ align_keep_extra_space = false # false / true
+
+# Align variable definitions in prototypes and functions
+ align_func_params = true # false / true
+
+# Align parameters in single-line functions that have the same name.
+# The function names must already be aligned with each other.
+ align_same_func_call_params = false # false / true
+
+# The span for aligning variable definitions (0=don't align)
+ align_var_def_span = 1 # number
+
+# How to align the star in variable definitions.
+# 0 =Part of the type 'void * foo;'
+# 1 =Part of the variable 'void *foo;'
+# 2 =Dangling 'void *foo;'
+ align_var_def_star_style = 0 # number
+
+# How to align the '&' in variable definitions.
+# 0 =Part of the type
+# 1 =Part of the variable
+# 2 =Dangling
+ align_var_def_amp_style = 0 # number
+
+# The threshold for aligning variable definitions (0=no limit)
+ align_var_def_thresh = 16 # number
+
+# The gap for aligning variable definitions
+ align_var_def_gap = 0 # number
+
+# Whether to align the colon in struct bit fields
+ align_var_def_colon = true # false / true
+
+# Whether to align any attribute after the variable name
+ align_var_def_attribute = false # false / true
+
+# Whether to align inline struct/enum/union variable definitions
+ align_var_def_inline = true # false / true
+
+# The span for aligning on '=' in assignments (0=don't align)
+ align_assign_span = 1 # number
+
+# The threshold for aligning on '=' in assignments (0=no limit)
+ align_assign_thresh = 12 # number
+
+# The span for aligning on '=' in enums (0=don't align)
+ align_enum_equ_span = 16 # number
+
+# The threshold for aligning on '=' in enums (0=no limit)
+ align_enum_equ_thresh = 0 # number
+
+# The span for aligning struct/union (0=don't align)
+ align_var_struct_span = 99 # number
+
+# The threshold for aligning struct/union member definitions (0=no limit)
+ align_var_struct_thresh = 0 # number
+
+# The gap for aligning struct/union member definitions
+ align_var_struct_gap = 0 # number
+
+# The span for aligning struct initializer values (0=don't align)
+ align_struct_init_span = 3 # number
+
+# The minimum space between the type and the synonym of a typedef
+ align_typedef_gap = 3 # number
+
+# The span for aligning single-line typedefs (0=don't align)
+ align_typedef_span = 5 # number
+
+# How to align typedef'd functions with other typedefs
+# 0 : Don't mix them at all
+# 1 : align the open paren with the types
+# 2 : align the function type name with the other type names
+ align_typedef_func = 0 # number
+
+# Controls the positioning of the '*' in typedefs. Just try it.
+# 0 : Align on typedef type, ignore '*'
+# 1 : The '*' is part of type name: typedef int *pint;
+# 2 : The '*' is part of the type, but dangling: typedef int *pint;
+ align_typedef_star_style = 0 # number
+
+# Controls the positioning of the '&' in typedefs. Just try it.
+# 0 : Align on typedef type, ignore '&'
+# 1 : The '&' is part of type name: typedef int &pint;
+# 2 : The '&' is part of the type, but dangling: typedef int &pint;
+ align_typedef_amp_style = 0 # number
+
+# The span for aligning comments that end lines (0=don't align)
+ align_right_cmt_span = 0 # number
+
+# If aligning comments, mix with comments after '}' and #endif with less than 3 spaces before the comment
+ align_right_cmt_mix = false # false / true
+
+# If a trailing comment is more than this number of columns away from the text it follows,
+# it will qualify for being aligned. This has to be > 0 to do anything.
+ align_right_cmt_gap = 0 # number
+
+# Align trailing comment at or beyond column N; 'pulls in' comments as a bonus side effect (0=ignore)
+ align_right_cmt_at_col = 0 # number
+
+# The span for aligning function prototypes (0=don't align)
+ align_func_proto_span = 0 # number
+
+# Minimum gap between the return type and the function name.
+ align_func_proto_gap = 0 # number
+
+# Align function protos on the 'operator' keyword instead of what follows
+ align_on_operator = false # false / true
+
+# Whether to mix aligning prototype and variable declarations.
+# If true, align_var_def_XXX options are used instead of align_func_proto_XXX options.
+ align_mix_var_proto = false # false / true
+
+# Align single-line functions with function prototypes, uses align_func_proto_span
+ align_single_line_func = false # false / true
+
+# Aligning the open brace of single-line functions.
+# Requires align_single_line_func=true, uses align_func_proto_span
+ align_single_line_brace = false # false / true
+
+# Gap for align_single_line_brace.
+ align_single_line_brace_gap = 0 # number
+
+# The span for aligning ObjC msg spec (0=don't align)
+ align_oc_msg_spec_span = 0 # number
+
+# Whether to align macros wrapped with a backslash and a newline.
+# This will not work right if the macro contains a multi-line comment.
+ align_nl_cont = true # false / true
+
+# # Align macro functions and variables together
+ align_pp_define_together = false # false / true
+
+# The minimum space between label and value of a preprocessor define
+ align_pp_define_gap = 4 # number
+
+# The span for aligning on '#define' bodies (0=don't align)
+ align_pp_define_span = 3 # number
+
+# Align lines that start with '<<' with previous '<<'. Default=true
+ align_left_shift = true # false / true
+
+# Span for aligning parameters in an Obj-C message call on the ':' (0=don't align)
+ align_oc_msg_colon_span = 0 # number
+
+# If true, always align with the first parameter, even if it is too short.
+ align_oc_msg_colon_first = false # false / true
+
+# Aligning parameters in an Obj-C '+' or '-' declaration on the ':'
+ align_oc_decl_colon = false # false / true
+
+#
+# Newline adding and removing options
+#
+
+# Whether to collapse empty blocks between '{' and '}'
+ nl_collapse_empty_body = false # false / true
+
+# Don 't split one-line braced assignments - 'foo_t f = { 1, 2 };'
+ nl_assign_leave_one_liners = true # false / true
+
+# Don 't split one-line braced statements inside a class xx { } body
+ nl_class_leave_one_liners = true # false / true
+
+# Don 't split one-line enums: 'enum foo { BAR = 15 };'
+ nl_enum_leave_one_liners = false # false / true
+
+# Don 't split one-line get or set functions
+ nl_getset_leave_one_liners = false # false / true
+
+# Don 't split one-line function definitions - 'int foo() { return 0; }'
+ nl_func_leave_one_liners = false # false / true
+
+# Don 't split one-line C++11 lambdas - '[]() { return 0; }'
+ nl_cpp_lambda_leave_one_liners = false # false / true
+
+# Don 't split one-line if/else statements - 'if(a) b++;'
+ nl_if_leave_one_liners = false # false / true
+
+# Don 't split one-line OC messages
+ nl_oc_msg_leave_one_liner = false # false / true
+
+# Add or remove newlines at the start of the file
+ nl_start_of_file = remove # ignore / add / remove / force
+
+# The number of newlines at the start of the file (only used if nl_start_of_file is 'add' or 'force'
+ nl_start_of_file_min = 0 # number
+
+# Add or remove newline at the end of the file
+ nl_end_of_file = force # ignore / add / remove / force
+
+# The number of newlines at the end of the file (only used if nl_end_of_file is 'add' or 'force')
+ nl_end_of_file_min = 1 # number
+
+# Add or remove newline between '=' and '{'
+ nl_assign_brace = force # ignore / add / remove / force
+
+# Add or remove newline between '=' and '[' (D only)
+ nl_assign_square = ignore # ignore / add / remove / force
+
+# Add or remove newline after '= [' (D only). Will also affect the newline before the ']'
+ nl_after_square_assign = ignore # ignore / add / remove / force
+
+# The number of blank lines after a block of variable definitions at the top of a function body
+# 0 = No change (default)
+ nl_func_var_def_blk = 1 # number
+
+# The number of newlines before a block of typedefs
+# 0 = No change (default)
+ nl_typedef_blk_start = 0 # number
+
+# The number of newlines after a block of typedefs
+# 0 = No change (default)
+ nl_typedef_blk_end = 0 # number
+
+# The maximum consecutive newlines within a block of typedefs
+# 0 = No change (default)
+ nl_typedef_blk_in = 0 # number
+
+# The number of newlines before a block of variable definitions not at the top of a function body
+# 0 = No change (default)
+ nl_var_def_blk_start = 0 # number
+
+# The number of newlines after a block of variable definitions not at the top of a function body
+# 0 = No change (default)
+ nl_var_def_blk_end = 0 # number
+
+# The maximum consecutive newlines within a block of variable definitions
+# 0 = No change (default)
+ nl_var_def_blk_in = 0 # number
+
+# Add or remove newline between a function call's ')' and '{', as in:
+# list_for_each (item, &list) { }
+ nl_fcall_brace = remove # ignore / add / remove / force
+
+# Add or remove newline between 'enum' and '{'
+ nl_enum_brace = remove # ignore / add / remove / force
+
+# Add or remove newline between 'struct and '{'
+ nl_struct_brace = remove # ignore / add / remove / force
+
+# Add or remove newline between 'union' and '{'
+ nl_union_brace = remove # ignore / add / remove / force
+
+# Add or remove newline between 'if' and '{'
+ nl_if_brace = remove # ignore / add / remove / force
+
+# Add or remove newline between '}' and 'else'
+ nl_brace_else = remove # ignore / add / remove / force
+
+# Add or remove newline between 'else if' and '{'
+# If set to ignore, nl_if_brace is used instead
+ nl_elseif_brace = ignore # ignore / add / remove / force
+
+# Add or remove newline between 'else' and '{'
+ nl_else_brace = remove # ignore / add / remove / force
+
+# Add or remove newline between 'else' and 'if'
+ nl_else_if = remove # ignore / add / remove / force
+
+# Add or remove newline between '}' and 'finally'
+ nl_brace_finally = remove # ignore / add / remove / force
+
+# Add or remove newline between 'finally' and '{'
+ nl_finally_brace = remove # ignore / add / remove / force
+
+# Add or remove newline between 'try' and '{'
+ nl_try_brace = remove # ignore / add / remove / force
+
+# Add or remove newline between get/set and '{'
+ nl_getset_brace = remove # ignore / add / remove / force
+
+# Add or remove newline between 'for' and '{'
+ nl_for_brace = remove # ignore / add / remove / force
+
+# Add or remove newline between 'catch' and '{'
+ nl_catch_brace = remove # ignore / add / remove / force
+
+# Add or remove newline between '}' and 'catch'
+ nl_brace_catch = force # ignore / add / remove / force
+
+# Add or remove newline between 'while' and '{'
+ nl_while_brace = remove # ignore / add / remove / force
+
+# Add or remove newline between 'scope (x)' and '{' (D)
+ nl_scope_brace = ignore # ignore / add / remove / force
+
+# Add or remove newline between 'unittest' and '{' (D)
+ nl_unittest_brace = ignore # ignore / add / remove / force
+
+# Add or remove newline between 'version (x)' and '{' (D)
+ nl_version_brace = ignore # ignore / add / remove / force
+
+# Add or remove newline between 'using' and '{'
+ nl_using_brace = remove # ignore / add / remove / force
+
+# Add or remove newline between two open or close braces.
+# Due to general newline/brace handling, REMOVE may not work.
+ nl_brace_brace = remove # ignore / add / remove / force
+
+# Add or remove newline between 'do' and '{'
+ nl_do_brace = remove # ignore / add / remove / force
+
+# Add or remove newline between '}' and 'while' of 'do' statement
+ nl_brace_while = remove # ignore / add / remove / force
+
+# Add or remove newline between 'switch' and '{'
+ nl_switch_brace = remove # ignore / add / remove / force
+
+# Add a newline between ')' and '{' if the ')' is on a different line than the if/for/etc.
+# Overrides nl_for_brace, nl_if_brace, nl_switch_brace, nl_while_switch, and nl_catch_brace.
+ nl_multi_line_cond = false # false / true
+
+# Force a newline in a define after the macro name for multi-line defines.
+ nl_multi_line_define = true # false / true
+
+# Whether to put a newline before 'case' statement
+ nl_before_case = true # false / true
+
+# Add or remove newline between ')' and 'throw'
+ nl_before_throw = force # ignore / add / remove / force
+
+# Whether to put a newline after 'case' statement
+ nl_after_case = true # false / true
+
+# Add or remove a newline between a case ':' and '{'. Overrides nl_after_case.
+ nl_case_colon_brace = remove # ignore / add / remove / force
+
+# Newline between namespace and {
+ nl_namespace_brace = remove # ignore / add / remove / force
+
+# Add or remove newline between 'template<>' and whatever follows.
+ nl_template_class = force # ignore / add / remove / force
+
+# Add or remove newline between 'class' and '{'
+ nl_class_brace = remove # ignore / add / remove / force
+
+# Add or remove newline after each ',' in the constructor member initialization
+ nl_class_init_args = remove # ignore / add / remove / force
+
+# Add or remove newline between return type and function name in a function definition
+ nl_func_type_name = remove # ignore / add / remove / force
+
+# Add or remove newline between return type and function name inside a class {}
+# Uses nl_func_type_name or nl_func_proto_type_name if set to ignore.
+ nl_func_type_name_class = remove # ignore / add / remove / force
+
+# Add or remove newline between function scope and name in a definition
+# Controls the newline after '::' in 'void A::f() { }'
+ nl_func_scope_name = remove # ignore / add / remove / force
+
+# Add or remove newline between return type and function name in a prototype
+ nl_func_proto_type_name = remove # ignore / add / remove / force
+
+# Add or remove newline between a function name and the opening '('
+ nl_func_paren = remove # ignore / add / remove / force
+
+# Add or remove newline between a function name and the opening '(' in the definition
+ nl_func_def_paren = remove # ignore / add / remove / force
+
+# Add or remove newline after '(' in a function declaration
+ nl_func_decl_start = remove # ignore / add / remove / force
+
+# Add or remove newline after '(' in a function definition
+ nl_func_def_start = remove # ignore / add / remove / force
+
+# Overrides nl_func_decl_start when there is only one parameter.
+ nl_func_decl_start_single = ignore # ignore / add / remove / force
+
+# Overrides nl_func_def_start when there is only one parameter.
+ nl_func_def_start_single = ignore # ignore / add / remove / force
+
+# Add or remove newline after each ',' in a function declaration
+ nl_func_decl_args = remove # ignore / add / remove / force
+
+# Add or remove newline after each ',' in a function definition
+ nl_func_def_args = remove # ignore / add / remove / force
+
+# Add or remove newline before the ')' in a function declaration
+ nl_func_decl_end = remove # ignore / add / remove / force
+
+# Add or remove newline before the ')' in a function definition
+ nl_func_def_end = remove # ignore / add / remove / force
+
+# Overrides nl_func_decl_end when there is only one parameter.
+ nl_func_decl_end_single = ignore # ignore / add / remove / force
+
+# Overrides nl_func_def_end when there is only one parameter.
+ nl_func_def_end_single = ignore # ignore / add / remove / force
+
+# Add or remove newline between '()' in a function declaration.
+ nl_func_decl_empty = remove # ignore / add / remove / force
+
+# Add or remove newline between '()' in a function definition.
+ nl_func_def_empty = remove # ignore / add / remove / force
+
+# Whether to put each OC message parameter on a separate line
+# See nl_oc_msg_leave_one_liner
+ nl_oc_msg_args = false # false / true
+
+# Add or remove newline between function signature and '{'
+ nl_fdef_brace = remove # ignore / add / remove / force
+
+# Add or remove newline between C++11 lambda signature and '{'
+ nl_cpp_ldef_brace = ignore # ignore / add / remove / force
+
+# Add or remove a newline between the return keyword and return expression.
+ nl_return_expr = remove # ignore / add / remove / force
+
+# Whether to put a newline after semicolons, except in 'for' statements
+ nl_after_semicolon = true # false / true
+
+# Whether to put a newline after brace open.
+# This also adds a newline before the matching brace close.
+ nl_after_brace_open = true # false / true
+
+# If nl_after_brace_open and nl_after_brace_open_cmt are true, a newline is
+# placed between the open brace and a trailing single-line comment.
+ nl_after_brace_open_cmt = true # false / true
+
+# Whether to put a newline after a virtual brace open with a non-empty body.
+# These occur in un-braced if/while/do/for statement bodies.
+ nl_after_vbrace_open = false # false / true
+
+# Whether to put a newline after a virtual brace open with an empty body.
+# These occur in un-braced if/while/do/for statement bodies.
+ nl_after_vbrace_open_empty = false # false / true
+
+# Whether to put a newline after a brace close.
+# Does not apply if followed by a necessary ';'.
+ nl_after_brace_close = true # false / true
+
+# Whether to put a newline after a virtual brace close.
+# Would add a newline before return in: 'if (foo) a++; return;'
+ nl_after_vbrace_close = false # false / true
+
+# Control the newline between the close brace and 'b' in: 'struct { int a; } b;'
+# Affects enums, unions, and structures. If set to ignore, uses nl_after_brace_close
+ nl_brace_struct_var = remove # ignore / add / remove / force
+
+# Whether to alter newlines in '#define' macros
+ nl_define_macro = false # false / true
+
+# Whether to not put blanks after '#ifxx', '#elxx', or before '#endif'
+ nl_squeeze_ifdef = false # false / true
+
+# Add or remove blank line before 'if'
+ nl_before_if = force # ignore / add / remove / force
+
+# Add or remove blank line after 'if' statement
+ nl_after_if = force # ignore / add / remove / force
+
+# Add or remove blank line before 'for'
+ nl_before_for = force # ignore / add / remove / force
+
+# Add or remove blank line after 'for' statement
+ nl_after_for = force # ignore / add / remove / force
+
+# Add or remove blank line before 'while'
+ nl_before_while = force # ignore / add / remove / force
+
+# Add or remove blank line after 'while' statement
+ nl_after_while = force # ignore / add / remove / force
+
+# Add or remove blank line before 'switch'
+ nl_before_switch = force # ignore / add / remove / force
+
+# Add or remove blank line after 'switch' statement
+ nl_after_switch = force # ignore / add / remove / force
+
+# Add or remove blank line before 'do'
+ nl_before_do = force # ignore / add / remove / force
+
+# Add or remove blank line after 'do/while' statement
+ nl_after_do = force # ignore / add / remove / force
+
+# Whether to double-space commented-entries in struct/enum
+ nl_ds_struct_enum_cmt = false # false / true
+
+# Whether to double-space before the close brace of a struct/union/enum
+# ( lower priority than 'eat_blanks_before_close_brace')
+ nl_ds_struct_enum_close_brace = false # false / true
+
+# Add or remove a newline around a class colon.
+# Related to pos_class_colon, nl_class_init_args, and pos_comma.
+ nl_class_colon = remove # ignore / add / remove / force
+
+# Change simple unbraced if statements into a one-liner
+# 'if(b)\n i++;' => 'if(b) i++;'
+ nl_create_if_one_liner = false # false / true
+
+# Change simple unbraced for statements into a one-liner
+# 'for (i=0;i<5;i++)\n foo(i);' => 'for (i=0;i<5;i++) foo(i);'
+ nl_create_for_one_liner = false # false / true
+
+# Change simple unbraced while statements into a one-liner
+# 'while (i<5)\n foo(i++);' => 'while (i<5) foo(i++);'
+ nl_create_while_one_liner = false # false / true
+
+#
+# Positioning options
+#
+
+# The position of arithmetic operators in wrapped expressions
+ pos_arith = ignore # ignore / join / lead / lead_break / lead_force / trail / trail_break / trail_force
+
+# The position of assignment in wrapped expressions.
+# Do not affect '=' followed by '{'
+ pos_assign = ignore # ignore / join / lead / lead_break / lead_force / trail / trail_break / trail_force
+
+# The position of boolean operators in wrapped expressions
+ pos_bool = trail # ignore / join / lead / lead_break / lead_force / trail / trail_break / trail_force
+
+# The position of comparison operators in wrapped expressions
+ pos_compare = ignore # ignore / join / lead / lead_break / lead_force / trail / trail_break / trail_force
+
+# The position of conditional (b ? t : f) operators in wrapped expressions
+ pos_conditional = ignore # ignore / join / lead / lead_break / lead_force / trail / trail_break / trail_force
+
+# The position of the comma in wrapped expressions
+ pos_comma = ignore # ignore / join / lead / lead_break / lead_force / trail / trail_break / trail_force
+
+# The position of the comma in the constructor initialization list
+ pos_class_comma = ignore # ignore / join / lead / lead_break / lead_force / trail / trail_break / trail_force
+
+# The position of colons between constructor and member initialization
+ pos_class_colon = ignore # ignore / join / lead / lead_break / lead_force / trail / trail_break / trail_force
+
+#
+# Line Splitting options
+#
+
+# Try to limit code width to N number of columns
+ code_width = 0 # number
+
+# Whether to fully split long 'for' statements at semi-colons
+ ls_for_split_full = false # false / true
+
+# Whether to fully split long function protos/calls at commas
+ ls_func_split_full = false # false / true
+
+# Whether to split lines as close to code_width as possible and ignore some groupings
+ ls_code_width = false # false / true
+
+#
+# Blank line options
+#
+
+# The maximum consecutive newlines
+ nl_max = 2 # number
+
+# The number of newlines after a function prototype, if followed by another function prototype
+ nl_after_func_proto = 2 # number
+
+# The number of newlines after a function prototype, if not followed by another function prototype
+ nl_after_func_proto_group = 2 # number
+
+# The number of newlines after '}' of a multi-line function body
+ nl_after_func_body = 2 # number
+
+# The number of newlines after '}' of a multi-line function body in a class declaration
+ nl_after_func_body_class = 2 # number
+
+# The number of newlines after '}' of a single line function body
+ nl_after_func_body_one_liner = 0 # number
+
+# The minimum number of newlines before a multi-line comment.
+# Doesn 't apply if after a brace open or another multi-line comment.
+ nl_before_block_comment = 2 # number
+
+# The minimum number of newlines before a single-line C comment.
+# Doesn 't apply if after a brace open or other single-line C comments.
+ nl_before_c_comment = 0 # number
+
+# The minimum number of newlines before a CPP comment.
+# Doesn 't apply if after a brace open or other CPP comments.
+ nl_before_cpp_comment = 2 # number
+
+# Whether to force a newline after a multi-line comment.
+ nl_after_multiline_comment = false # false / true
+
+# The number of newlines after '}' or ';' of a struct/enum/union definition
+ nl_after_struct = 2 # number
+
+# The number of newlines after '}' or ';' of a class definition
+ nl_after_class = 2 # number
+
+# The number of newlines before a 'private:', 'public:', 'protected:', 'signals:', or 'slots:' label.
+# Will not change the newline count if after a brace open.
+# 0 = No change.
+ nl_before_access_spec = 0 # number
+
+# The number of newlines after a 'private:', 'public:', 'protected:', 'signals:', or 'slots:' label.
+# 0 = No change.
+ nl_after_access_spec = 2 # number
+
+# The number of newlines between a function def and the function comment.
+# 0 = No change.
+ nl_comment_func_def = 1 # number
+
+# The number of newlines after a try-catch-finally block that isn't followed by a brace close.
+# 0 = No change.
+ nl_after_try_catch_finally = 0 # number
+
+# The number of newlines before and after a property, indexer or event decl.
+# 0 = No change.
+ nl_around_cs_property = 0 # number
+
+# The number of newlines between the get/set/add/remove handlers in C#.
+# 0 = No change.
+ nl_between_get_set = 0 # number
+
+# Add or remove newline between C# property and the '{'
+ nl_property_brace = ignore # ignore / add / remove / force
+
+# Whether to remove blank lines after '{'
+ eat_blanks_after_open_brace = false # false / true
+
+# Whether to remove blank lines before '}'
+ eat_blanks_before_close_brace = false # false / true
+
+# How aggressively to remove extra newlines not in preproc.
+# 0 : No change
+# 1 : Remove most newlines not handled by other config
+# 2 : Remove all newlines and reformat completely by config
+ nl_remove_extra_newlines = 1 # number
+
+# Whether to put a blank line before 'return' statements, unless after an open brace.
+ nl_before_return = false # false / true
+
+# Whether to put a blank line after 'return' statements, unless followed by a close brace.
+ nl_after_return = true # false / true
+
+# Whether to put a newline after a Java annotation statement.
+# Only affects annotations that are after a newline.
+ nl_after_annotation = ignore # ignore / add / remove / force
+
+# Controls the newline between two annotations.
+ nl_between_annotation = ignore # ignore / add / remove / force
+
+#
+# Code modifying options (non-whitespace)
+#
+
+# Add or remove braces on single-line 'do' statement
+ mod_full_brace_do = remove # ignore / add / remove / force
+
+# Add or remove braces on single-line 'for' statement
+ mod_full_brace_for = remove # ignore / add / remove / force
+
+# Add or remove braces on single-line function definitions. (Pawn)
+ mod_full_brace_function = force # ignore / add / remove / force
+
+# Add or remove braces on single-line 'if' statement. Will not remove the braces if they contain an 'else'.
+ mod_full_brace_if = remove # ignore / add / remove / force
+
+# Make all if/elseif/else statements in a chain be braced or not. Overrides mod_full_brace_if.
+# If any must be braced, they are all braced. If all can be unbraced, then the braces are removed.
+ mod_full_brace_if_chain = true # false / true
+
+# Don 't remove braces around statements that span N newlines
+ mod_full_brace_nl = 0 # number
+
+# Add or remove braces on single-line 'while' statement
+ mod_full_brace_while = remove # ignore / add / remove / force
+
+# Add or remove braces on single-line 'using ()' statement
+ mod_full_brace_using = ignore # ignore / add / remove / force
+
+# Add or remove unnecessary paren on 'return' statement
+ mod_paren_on_return = remove # ignore / add / remove / force
+
+# Whether to change optional semicolons to real semicolons
+ mod_pawn_semicolon = false # false / true
+
+# Add parens on 'while' and 'if' statement around bools
+ mod_full_paren_if_bool = true # false / true
+
+# Whether to remove superfluous semicolons
+ mod_remove_extra_semicolon = true # false / true
+
+# If a function body exceeds the specified number of newlines and doesn't have a comment after
+# the close brace, a comment will be added.
+ mod_add_long_function_closebrace_comment = 0 # number
+
+# If a switch body exceeds the specified number of newlines and doesn't have a comment after
+# the close brace, a comment will be added.
+ mod_add_long_switch_closebrace_comment = 0 # number
+
+# If an #ifdef body exceeds the specified number of newlines and doesn't have a comment after
+# the #endif, a comment will be added.
+ mod_add_long_ifdef_endif_comment = 1 # number
+
+# If an #ifdef or #else body exceeds the specified number of newlines and doesn't have a comment after
+# the #else, a comment will be added.
+ mod_add_long_ifdef_else_comment = 1 # number
+
+# If TRUE, will sort consecutive single-line 'import' statements [Java, D]
+ mod_sort_import = false # false / true
+
+# If TRUE, will sort consecutive single-line 'using' statements [C#]
+ mod_sort_using = false # false / true
+
+# If TRUE, will sort consecutive single-line '#include' statements [C/C++] and '#import' statements [Obj-C]
+# This is generally a bad idea, as it may break your code.
+ mod_sort_include = false # false / true
+
+# If TRUE, it will move a 'break' that appears after a fully braced 'case' before the close brace.
+ mod_move_case_break = false # false / true
+
+# Will add or remove the braces around a fully braced case statement.
+# Will only remove the braces if there are no variable declarations in the block.
+ mod_case_brace = remove # ignore / add / remove / force
+
+# If TRUE, it will remove a void 'return;' that appears as the last statement in a function.
+ mod_remove_empty_return = true # false / true
+
+#
+# Comment modifications
+#
+
+# Try to wrap comments at cmt_width columns
+ cmt_width = 0 # number
+
+# Set the comment reflow mode (default: 0)
+# 0 : no reflowing (apart from the line wrapping due to cmt_width)
+# 1 : no touching at all
+# 2 : full reflow
+ cmt_reflow_mode = 0 # number
+
+# If false, disable all multi-line comment changes, including cmt_width. keyword substitution, and leading chars.
+# Default is true.
+ cmt_indent_multi = true # false / true
+
+# Whether to group c-comments that look like they are in a block
+ cmt_c_group = false # false / true
+
+# Whether to put an empty '/*' on the first line of the combined c-comment
+ cmt_c_nl_start = false # false / true
+
+# Whether to put a newline before the closing '*/' of the combined c-comment
+ cmt_c_nl_end = false # false / true
+
+# Whether to group cpp-comments that look like they are in a block
+ cmt_cpp_group = false # false / true
+
+# Whether to put an empty '/*' on the first line of the combined cpp-comment
+ cmt_cpp_nl_start = false # false / true
+
+# Whether to put a newline before the closing '*/' of the combined cpp-comment
+ cmt_cpp_nl_end = false # false / true
+
+# Whether to change cpp-comments into c-comments
+ cmt_cpp_to_c = false # false / true
+
+# Whether to put a star on subsequent comment lines
+ cmt_star_cont = true # false / true
+
+# The number of spaces to insert at the start of subsequent comment lines
+ cmt_sp_before_star_cont = 0 # number
+
+# The number of spaces to insert after the star on subsequent comment lines
+ cmt_sp_after_star_cont = 0 # number
+
+# For multi-line comments with a '*' lead, remove leading spaces if the first and last lines of
+# the comment are the same length. Default=True
+ cmt_multi_check_last = true # false / true
+
+# The filename that contains text to insert at the head of a file if the file doesn't start with a C/C++ comment.
+# Will substitute $(filename) with the current file's name.
+ cmt_insert_file_header = "" # string
+
+# The filename that contains text to insert at the end of a file if the file doesn't end with a C/C++ comment.
+# Will substitute $(filename) with the current file's name.
+ cmt_insert_file_footer = "" # string
+
+# The filename that contains text to insert before a function implementation if the function isn't preceded with a C/C++ comment.
+# Will substitute $(function) with the function name and $(javaparam) with the javadoc @param and @return stuff.
+# Will also substitute $(fclass) with the class name: void CFoo::Bar() { ... }
+ cmt_insert_func_header = "" # string
+
+# The filename that contains text to insert before a class if the class isn't preceded with a C/C++ comment.
+# Will substitute $(class) with the class name.
+ cmt_insert_class_header = "" # string
+
+# The filename that contains text to insert before a Obj-C message specification if the method isn't preceeded with a C/C++ comment.
+# Will substitute $(message) with the function name and $(javaparam) with the javadoc @param and @return stuff.
+ cmt_insert_oc_msg_header = "" # string
+
+# If a preprocessor is encountered when stepping backwards from a function name, then
+# this option decides whether the comment should be inserted.
+# Affects cmt_insert_oc_msg_header, cmt_insert_func_header and cmt_insert_class_header.
+ cmt_insert_before_preproc = false # false / true
+
+#
+# Preprocessor options
+#
+
+# Control indent of preprocessors inside #if blocks at brace level 0
+ pp_indent = remove # ignore / add / remove / force
+
+# Whether to indent #if/#else/#endif at the brace level (true) or from column 1 (false)
+ pp_indent_at_level = false # false / true
+
+# If pp_indent_at_level=false, specifies the number of columns to indent per level. Default=1.
+ pp_indent_count = 1 # number
+
+# Add or remove space after # based on pp_level of #if blocks
+ pp_space = ignore # ignore / add / remove / force
+
+# Sets the number of spaces added with pp_space
+ pp_space_count = 0 # number
+
+# The indent for #region and #endregion in C# and '#pragma region' in C/C++
+ pp_indent_region = 0 # number
+
+# Whether to indent the code between #region and #endregion
+ pp_region_indent_code = false # false / true
+
+# If pp_indent_at_level=true, sets the indent for #if, #else, and #endif when not at file-level
+ pp_indent_if = 0 # number
+
+# Control whether to indent the code between #if, #else and #endif when not at file-level
+ pp_if_indent_code = false # false / true
+
+# Whether to indent '#define' at the brace level (true) or from column 1 (false)
+ pp_define_at_level = false # false / true
+
+# You can force a token to be a type with the 'type' option.
+# Example :
+# type myfoo1 myfoo2
+#
+# You can create custom macro-based indentation using macro-open,
+# macro -else and macro-close.
+# Example :
+# macro -open BEGIN_TEMPLATE_MESSAGE_MAP
+# macro -open BEGIN_MESSAGE_MAP
+# macro -close END_MESSAGE_MAP
+#
+# You can assign any keyword to any type with the set option.
+# set func_call_user _ N_
+#
+# The full syntax description of all custom definition config entries
+# is shown below:
+#
+# define custom tokens as :
+# - embed whitespace in token using '' escape character, or
+# put token in quotes
+# - these: ' " and ` are recognized as quote delimiters
+#
+# type token1 token2 token3 ...
+# ^ optionally specify multiple tokens on a single line
+# define def_token output_token
+# ^ output_token is optional, then NULL is assumed
+# macro -open token
+# macro -close token
+# macro -else token
+# set id token1 token2 ...
+# ^ optionally specify multiple tokens on a single line
+# ^ id is one of the names in token_enum.h sans the CT_ prefix,
+# e .g. PP_PRAGMA
+#
+# all tokens are separated by any mix of ',' commas, '=' equal signs
+# and whitespace (space, tab)
+#
-- 
GitLab