.uncrustify.cfg

# Uncrustify 0.60

#
# General options
#

# The type of line endings
newlines = lf # auto / lf / crlf / cr

# The original size of tabs in the input
 input_tab_size = 4 # number

# The size of tabs in the output (only used if align_with_tabs=true)
 output_tab_size = 4 # number

# The ASCII value of the string escape char, usually 92 (\) or 94 (^). (Pawn)
 string_escape_char = 92 # number

# Alternate string escape char for Pawn. Only works right before the quote char.
 string_escape_char2 = 0 # number

# Allow interpreting '>=' and '>>=' as part of a template in 'void f(list<list<B>>=val);'.
# If true (default), 'assert(x<0 && y>=3)' will be broken.
# Improvements to template detection may make this option obsolete.
 tok_split_gte = true # false / true

# Control what to do with the UTF-8 BOM (recommend 'remove')
 utf8_bom = remove # ignore / add / remove / force

# If the file contains bytes with values between 128 and 255, but is not UTF-8, then output as UTF-8
 utf8_byte = false # false / true

# Force the output encoding to UTF-8
 utf8_force = false # false / true

#
# Indenting
#

# The number of columns to indent per level.
# Usually 2, 3, 4, or 8.
 indent_columns = 4 # number

# The continuation indent. If non-zero, this overrides the indent of '(' and '=' continuation indents.
# For FreeBSD, this is set to 4. Negative value is absolute and not increased for each ( level
 indent_continue = 0 # number

# How to use tabs when indenting code
# 0 =spaces only
# 1 =indent with tabs to brace level, align with spaces
# 2 =indent and align with tabs, using spaces when not on a tabstop
 indent_with_tabs = 2 # number

# Comments that are not a brace level are indented with tabs on a tabstop.
# Requires indent_with_tabs=2. If false, will use spaces.
 indent_cmt_with_tabs = false # false / true

# Whether to indent strings broken by '\' so that they line up
 indent_align_string = true # false / true

# The number of spaces to indent multi-line XML strings.
# Requires indent_align_string=True
 indent_xml_string = 0 # number

# Spaces to indent '{' from level
 indent_brace = 0 # number

# Whether braces are indented to the body level
 indent_braces = false # false / true

# Disabled indenting function braces if indent_braces is true
 indent_braces_no_func = false # false / true

# Disabled indenting class braces if indent_braces is true
 indent_braces_no_class = false # false / true

# Disabled indenting struct braces if indent_braces is true
 indent_braces_no_struct = false # false / true

# Indent based on the size of the brace parent, i.e. 'if' => 3 spaces, 'for' => 4 spaces, etc.
 indent_brace_parent = false # false / true

# Whether the 'namespace' body is indented
 indent_namespace = false # false / true

# The number of spaces to indent a namespace block
 indent_namespace_level = 0 # number

# If the body of the namespace is longer than this number, it won't be indented.
# Requires indent_namespace=true. Default=0 (no limit)
 indent_namespace_limit = 0 # number

# Whether the 'extern "C"' body is indented
 indent_extern = false # false / true

# Whether the 'class' body is indented
 indent_class = true # false / true

# Whether to indent the stuff after a leading class colon
 indent_class_colon = true # false / true

# Virtual indent from the ':' for member initializers. Default is 2
 indent_ctor_init_leading = 2 # number

# Additional indenting for constructor initializer list
 indent_ctor_init = 0 # number

# False =treat 'else\nif' as 'else if' for indenting purposes
# True =indent the 'if' one level
 indent_else_if = false # false / true

# Amount to indent variable declarations after a open brace. neg=relative, pos=absolute
 indent_var_def_blk = 0 # number

# Indent continued variable declarations instead of aligning.
 indent_var_def_cont = false # false / true

# True : force indentation of function definition to start in column 1
# False : use the default behavior
 indent_func_def_force_col1 = false # false / true

# True : indent continued function call parameters one indent level
# False : align parameters under the open paren
 indent_func_call_param = false # false / true

# Same as indent_func_call_param, but for function defs
 indent_func_def_param = false # false / true

# Same as indent_func_call_param, but for function protos
 indent_func_proto_param = false # false / true

# Same as indent_func_call_param, but for class declarations
 indent_func_class_param = false # false / true

# Same as indent_func_call_param, but for class variable constructors
 indent_func_ctor_var_param = false # false / true

# Same as indent_func_call_param, but for templates
 indent_template_param = false # false / true

# Double the indent for indent_func_xxx_param options
 indent_func_param_double = false # false / true

# Indentation column for standalone 'const' function decl/proto qualifier
 indent_func_const = 0 # number

# Indentation column for standalone 'throw' function decl/proto qualifier
 indent_func_throw = 0 # number

# The number of spaces to indent a continued '->' or '.'
# Usually set to 0, 1, or indent_columns.
 indent_member = 3 # number

# Spaces to indent single line (' // ') comments on lines before code
 indent_sing_line_comments = 1 # number

# If set, will indent trailing single line (' // ') comments relative
# to the code instead of trying to keep the same absolute column
 indent_relative_single_line_comments = true # false / true

# Spaces to indent 'case' from 'switch'
# Usually 0 or indent_columns.
 indent_switch_case = 0 # number

# Spaces to shift the 'case' line, without affecting any other lines
# Usually 0.
 indent_case_shift = 0 # number

# Spaces to indent '{' from 'case'.
# By default, the brace will appear under the 'c' in case.
# Usually set to 0 or indent_columns.
 indent_case_brace = 3 # number

# Whether to indent comments found in first column
 indent_col1_comment = true # false / true

# How to indent goto labels
# > 0 : absolute column where 1 is the leftmost column
# <= 0 : subtract from brace indent
 indent_label = 1 # number

# Same as indent_label, but for access specifiers that are followed by a colon
 indent_access_spec = -4 # number

# Indent the code after an access specifier by one level.
# If set, this option forces 'indent_access_spec=0'
 indent_access_spec_body = false # false / true

# If an open paren is followed by a newline, indent the next line so that it lines up after the open paren (not recommended)
 indent_paren_nl = false # false / true

# Controls the indent of a close paren after a newline.
# 0 : Indent to body level
# 1 : Align under the open paren
# 2 : Indent to the brace level
 indent_paren_close = 0 # number

# Controls the indent of a comma when inside a paren.If TRUE, aligns under the open paren
 indent_comma_paren = false # false / true

# Controls the indent of a BOOL operator when inside a paren.If TRUE, aligns under the open paren
 indent_bool_paren = false # false / true

# If 'indent_bool_paren' is true, controls the indent of the first expression. If TRUE, aligns the first expression to the following ones
 indent_first_bool_expr = false # false / true

# If an open square is followed by a newline, indent the next line so that it lines up after the open square (not recommended)
 indent_square_nl = false # false / true

# Don 't change the relative indent of ESQL/C 'EXEC SQL' bodies
 indent_preserve_sql = false # false / true

# Align continued statements at the '='. Default=True
# If FALSE or the '=' is followed by a newline, the next line is indent one tab.
 indent_align_assign = true # false / true

# Indent OC blocks at brace level instead of usual rules.
 indent_oc_block = false # false / true

# Indent OC blocks in a message relative to the parameter name.
# 0 =use indent_oc_block rules, 1+=spaces to indent
 indent_oc_block_msg = 0 # number

# Minimum indent for subsequent parameters
 indent_oc_msg_colon = 0 # number

#
# Spacing options
#

# Add or remove space around arithmetic operator '+', '-', '/', '*', etc
 sp_arith = force # ignore / add / remove / force

# Add or remove space around assignment operator '=', '+=', etc
 sp_assign = force # ignore / add / remove / force

# Add or remove space around '=' in C++11 lambda capture specifications. Overrides sp_assign
 sp_cpp_lambda_assign = remove # ignore / add / remove / force

# Add or remove space after the capture specification in C++11 lambda.
 sp_cpp_lambda_paren = force # ignore / add / remove / force

# Add or remove space around assignment operator '=' in a prototype
 sp_assign_default = force # ignore / add / remove / force

# Add or remove space before assignment operator '=', '+=', etc. Overrides sp_assign.
 sp_before_assign = force # ignore / add / remove / force

# Add or remove space after assignment operator '=', '+=', etc. Overrides sp_assign.
 sp_after_assign = force # ignore / add / remove / force

# Add or remove space around assignment '=' in enum
 sp_enum_assign = force # ignore / add / remove / force

# Add or remove space before assignment '=' in enum. Overrides sp_enum_assign.
 sp_enum_before_assign = ignore # ignore / add / remove / force

# Add or remove space after assignment '=' in enum. Overrides sp_enum_assign.
 sp_enum_after_assign = ignore # ignore / add / remove / force

# Add or remove space around preprocessor '##' concatenation operator. Default=Add
 sp_pp_concat = force # ignore / add / remove / force

# Add or remove space after preprocessor '#' stringify operator. Also affects the '#@' charizing operator. Default=Add
 sp_pp_stringify = force # ignore / add / remove / force

# Add or remove space before preprocessor '#' stringify operator as in '#define x(y) L#y'.
 sp_before_pp_stringify = ignore # ignore / add / remove / force

# Add or remove space around boolean operators '&&' and '||'
 sp_bool = force # ignore / add / remove / force

# Add or remove space around compare operator '<', '>', '==', etc
 sp_compare = force # ignore / add / remove / force

# Add or remove space inside '(' and ')'
 sp_inside_paren = force # ignore / add / remove / force

# Add or remove space between nested parens: '((' vs ') )'
 sp_paren_paren = force # ignore / add / remove / force

# Add or remove space between back-to-back parens: ')(' vs ') ('
 sp_cparen_oparen = force # ignore / add / remove / force

# Whether to balance spaces inside nested parens
 sp_balance_nested_parens = false # false / true

# Add or remove space between ')' and '{'
 sp_paren_brace = force # ignore / add / remove / force

# Add or remove space before pointer star '*'
 sp_before_ptr_star = force # ignore / add / remove / force

# Add or remove space before pointer star '*' that isn't followed by a variable name
# If set to 'ignore', sp_before_ptr_star is used instead.
 sp_before_unnamed_ptr_star = force # ignore / add / remove / force

# Add or remove space between pointer stars '*'
 sp_between_ptr_star = force # ignore / add / remove / force

# Add or remove space after pointer star '*', if followed by a word.
 sp_after_ptr_star = force # ignore / add / remove / force

# Add or remove space after a pointer star '*', if followed by a func proto/def.
 sp_after_ptr_star_func = force # ignore / add / remove / force

# Add or remove space after a pointer star '*', if followed by an open paren (function types).
 sp_ptr_star_paren = force # ignore / add / remove / force

# Add or remove space before a pointer star '*', if followed by a func proto/def.
 sp_before_ptr_star_func = force # ignore / add / remove / force

# Add or remove space before a reference sign '&'
 sp_before_byref = force # ignore / add / remove / force

# Add or remove space before a reference sign '&' that isn't followed by a variable name
# If set to 'ignore', sp_before_byref is used instead.
 sp_before_unnamed_byref = force # ignore / add / remove / force

# Add or remove space after reference sign '&', if followed by a word.
 sp_after_byref = force # ignore / add / remove / force

# Add or remove space after a reference sign '&', if followed by a func proto/def.
 sp_after_byref_func = force # ignore / add / remove / force

# Add or remove space before a reference sign '&', if followed by a func proto/def.
 sp_before_byref_func = force # ignore / add / remove / force

# Add or remove space between type and word. Default=Force
 sp_after_type = force # ignore / add / remove / force

# Add or remove space before the paren in the D constructs 'template Foo(' and 'class Foo('.
 sp_before_template_paren = ignore # ignore / add / remove / force

# Add or remove space in 'template <' vs 'template<'.
# If set to ignore, sp_before_angle is used.
 sp_template_angle = force # ignore / add / remove / force

# Add or remove space before '<>'
 sp_before_angle = force # ignore / add / remove / force

# Add or remove space inside '<' and '>'
 sp_inside_angle = force # ignore / add / remove / force

# Add or remove space after '<>'
 sp_after_angle = force # ignore / add / remove / force

# Add or remove space between '<>' and '(' as found in 'new List<byte>();'
 sp_angle_paren = force # ignore / add / remove / force

# Add or remove space between '<>' and a word as in 'List<byte> m;'
 sp_angle_word = force # ignore / add / remove / force

# Add or remove space between '>' and '>' in '>>' (template stuff C++/C# only). Default=Add
 sp_angle_shift = force # ignore / add / remove / force

# Permit removal of the space between '>>' in 'foo<bar<int> >' (C++11 only). Default=False
# sp_angle_shift cannot remove the space without this option.
 sp_permit_cpp11_shift = true # false / true

# Add or remove space before '(' of 'if', 'for', 'switch', and 'while'
 sp_before_sparen = force # ignore / add / remove / force

# Add or remove space inside if-condition '(' and ')'
 sp_inside_sparen = force # ignore / add / remove / force

# Add or remove space before if-condition ')'. Overrides sp_inside_sparen.
 sp_inside_sparen_close = force # ignore / add / remove / force

# Add or remove space before if-condition '('. Overrides sp_inside_sparen.
 sp_inside_sparen_open = ignore # ignore / add / remove / force

# Add or remove space after ')' of 'if', 'for', 'switch', and 'while'
 sp_after_sparen = force # ignore / add / remove / force

# Add or remove space between ')' and '{' of 'if', 'for', 'switch', and 'while'
 sp_sparen_brace = force # ignore / add / remove / force

# Add or remove space between 'invariant' and '(' in the D language.
 sp_invariant_paren = ignore # ignore / add / remove / force

# Add or remove space after the ')' in 'invariant (C) c' in the D language.
 sp_after_invariant_paren = force # ignore / add / remove / force

# Add or remove space before empty statement ';' on 'if', 'for' and 'while'
 sp_special_semi = ignore # ignore / add / remove / force

# Add or remove space before ';'. Default=Remove
 sp_before_semi = remove # ignore / add / remove / force

# Add or remove space before ';' in non-empty 'for' statements
 sp_before_semi_for = ignore # ignore / add / remove / force

# Add or remove space before a semicolon of an empty part of a for statement.
 sp_before_semi_for_empty = force # ignore / add / remove / force

# Add or remove space after ';', except when followed by a comment. Default=Add
 sp_after_semi = force # ignore / add / remove / force

# Add or remove space after ';' in non-empty 'for' statements. Default=Force
 sp_after_semi_for = force # ignore / add / remove / force

# Add or remove space after the final semicolon of an empty part of a for statement: for ( ; ; <here> ).
 sp_after_semi_for_empty = ignore # ignore / add / remove / force

# Add or remove space before '[' (except '[]')
 sp_before_square = ignore # ignore / add / remove / force

# Add or remove space before '[]'
 sp_before_squares = ignore # ignore / add / remove / force

# Add or remove space inside a non-empty '[' and ']'
 sp_inside_square = remove # ignore / add / remove / force

# Add or remove space after ','
 sp_after_comma = force # ignore / add / remove / force

# Add or remove space before ','
 sp_before_comma = remove # ignore / add / remove / force

# Add or remove space between an open paren and comma: '(,' vs '( ,'
 sp_paren_comma = force # ignore / add / remove / force

# Add or remove space before the variadic '...' when preceded by a non-punctuator
 sp_before_ellipsis = ignore # ignore / add / remove / force

# Add or remove space after class ':'
 sp_after_class_colon = force # ignore / add / remove / force

# Add or remove space before class ':'
 sp_before_class_colon = force # ignore / add / remove / force

# Add or remove space before case ':'. Default=Remove
 sp_before_case_colon = remove # ignore / add / remove / force

# Add or remove space between 'operator' and operator sign
 sp_after_operator = force # ignore / add / remove / force

# Add or remove space between the operator symbol and the open paren, as in 'operator ++('
 sp_after_operator_sym = remove # ignore / add / remove / force

# Add or remove space after C/D cast, i.e. 'cast(int)a' vs 'cast(int) a' or '(int)a' vs '(int) a'
 sp_after_cast = force # ignore / add / remove / force

# Add or remove spaces inside cast parens
 sp_inside_paren_cast = force # ignore / add / remove / force

# Add or remove space between the type and open paren in a C++ cast, i.e. 'int(exp)' vs 'int (exp)'
 sp_cpp_cast_paren = force # ignore / add / remove / force

# Add or remove space between 'sizeof' and '('
 sp_sizeof_paren = force # ignore / add / remove / force

# Add or remove space after the tag keyword (Pawn)
 sp_after_tag = ignore # ignore / add / remove / force

# Add or remove space inside enum '{' and '}'
 sp_inside_braces_enum = force # ignore / add / remove / force

# Add or remove space inside struct/union '{' and '}'
 sp_inside_braces_struct = force # ignore / add / remove / force

# Add or remove space inside '{' and '}'
 sp_inside_braces = force # ignore / add / remove / force

# Add or remove space inside '{}'
 sp_inside_braces_empty = force # ignore / add / remove / force

# Add or remove space between return type and function name
# A minimum of 1 is forced except for pointer return types.
 sp_type_func = force # ignore / add / remove / force

# Add or remove space between function name and '(' on function declaration
 sp_func_proto_paren = force # ignore / add / remove / force

# Add or remove space between function name and '(' on function definition
 sp_func_def_paren = force # ignore / add / remove / force

# Add or remove space inside empty function '()'
 sp_inside_fparens = force # ignore / add / remove / force

# Add or remove space inside function '(' and ')'
 sp_inside_fparen = force # ignore / add / remove / force

# Add or remove space inside the first parens in the function type: 'void (*x)(...)'
 sp_inside_tparen = force # ignore / add / remove / force

# Add or remove between the parens in the function type: 'void (*x)(...)'
 sp_after_tparen_close = force # ignore / add / remove / force

# Add or remove space between ']' and '(' when part of a function call.
 sp_square_fparen = ignore # ignore / add / remove / force

# Add or remove space between ')' and '{' of function
 sp_fparen_brace = force # ignore / add / remove / force

# Add or remove space between function name and '(' on function calls
 sp_func_call_paren = force # ignore / add / remove / force

# Add or remove space between function name and '()' on function calls without parameters.
# If set to 'ignore' (the default), sp_func_call_paren is used.
 sp_func_call_paren_empty = ignore # ignore / add / remove / force

# Add or remove space between the user function name and '(' on function calls
# You need to set a keyword to be a user function, like this: 'set func_call_user _' in the config file.
 sp_func_call_user_paren = ignore # ignore / add / remove / force

# Add or remove space between a constructor/destructor and the open paren
 sp_func_class_paren = force # ignore / add / remove / force

# Add or remove space between 'return' and '('
 sp_return_paren = force # ignore / add / remove / force

# Add or remove space between '__attribute__' and '('
 sp_attribute_paren = force # ignore / add / remove / force

# Add or remove space between 'defined' and '(' in '#if defined (FOO)'
 sp_defined_paren = ignore # ignore / add / remove / force

# Add or remove space between 'throw' and '(' in 'throw (something)'
 sp_throw_paren = force # ignore / add / remove / force

# Add or remove space between 'throw' and anything other than '(' as in '@throw [...];'
 sp_after_throw = ignore # ignore / add / remove / force

# Add or remove space between 'catch' and '(' in 'catch (something) { }'
# If set to ignore, sp_before_sparen is used.
 sp_catch_paren = force # ignore / add / remove / force

# Add or remove space between 'version' and '(' in 'version (something) { }' (D language)
# If set to ignore, sp_before_sparen is used.
 sp_version_paren = ignore # ignore / add / remove / force

# Add or remove space between 'scope' and '(' in 'scope (something) { }' (D language)
# If set to ignore, sp_before_sparen is used.
 sp_scope_paren = ignore # ignore / add / remove / force

# Add or remove space between macro and value
 sp_macro = ignore # ignore / add / remove / force

# Add or remove space between macro function ')' and value
 sp_macro_func = ignore # ignore / add / remove / force

# Add or remove space between 'else' and '{' if on the same line
 sp_else_brace = force # ignore / add / remove / force

# Add or remove space between '}' and 'else' if on the same line
 sp_brace_else = force # ignore / add / remove / force

# Add or remove space between '}' and the name of a typedef on the same line
 sp_brace_typedef = force # ignore / add / remove / force

# Add or remove space between 'catch' and '{' if on the same line
 sp_catch_brace = force # ignore / add / remove / force

# Add or remove space between '}' and 'catch' if on the same line
 sp_brace_catch = force # ignore / add / remove / force

# Add or remove space between 'finally' and '{' if on the same line
 sp_finally_brace = force # ignore / add / remove / force

# Add or remove space between '}' and 'finally' if on the same line
 sp_brace_finally = force # ignore / add / remove / force

# Add or remove space between 'try' and '{' if on the same line
 sp_try_brace = force # ignore / add / remove / force

# Add or remove space between get/set and '{' if on the same line
 sp_getset_brace = force # ignore / add / remove / force

# Add or remove space between a variable and '{' for C++ uniform initialization
 sp_word_brace = force # ignore / add / remove / force

# Add or remove space between a variable and '{' for a namespace
 sp_word_brace_ns = force # ignore / add / remove / force

# Add or remove space before the '::' operator
 sp_before_dc = remove # ignore / add / remove / force

# Add or remove space after the '::' operator
 sp_after_dc = remove # ignore / add / remove / force

# Add or remove around the D named array initializer ':' operator
 sp_d_array_colon = ignore # ignore / add / remove / force

# Add or remove space after the '!' (not) operator. Default=Remove
 sp_not = remove # ignore / add / remove / force

# Add or remove space after the '~' (invert) operator. Default=Remove
 sp_inv = remove # ignore / add / remove / force

# Add or remove space after the '&' (address-of) operator. Default=Remove
# This does not affect the spacing after a '&' that is part of a type.
 sp_addr = force # ignore / add / remove / force

# Add or remove space around the '.' or '->' operators. Default=Remove
 sp_member = remove # ignore / add / remove / force

# Add or remove space after the '*' (dereference) operator. Default=Remove
# This does not affect the spacing after a '*' that is part of a type.
 sp_deref = force # ignore / add / remove / force

# Add or remove space after '+' or '-', as in 'x = -5' or 'y = +7'. Default=Remove
 sp_sign = remove # ignore / add / remove / force

# Add or remove space before or after '++' and '--', as in '(--x)' or 'y++;'. Default=Remove
 sp_incdec = remove # ignore / add / remove / force

# Add or remove space before a backslash-newline at the end of a line. Default=Add
 sp_before_nl_cont = force # ignore / add / remove / force

# Add or remove space after the scope '+' or '-', as in '-(void) foo;' or '+(int) bar;'
 sp_after_oc_scope = ignore # ignore / add / remove / force

# Add or remove space after the colon in message specs
# '-(int) f:(int) x;' vs '-(int) f: (int) x;'
 sp_after_oc_colon = ignore # ignore / add / remove / force

# Add or remove space before the colon in message specs
# '-(int) f: (int) x;' vs '-(int) f : (int) x;'
 sp_before_oc_colon = ignore # ignore / add / remove / force

# Add or remove space after the colon in immutable dictionary expression
# 'NSDictionary *test = @{@"foo" :@"bar"};'
 sp_after_oc_dict_colon = ignore # ignore / add / remove / force

# Add or remove space before the colon in immutable dictionary expression
# 'NSDictionary *test = @{@"foo" :@"bar"};'
 sp_before_oc_dict_colon = ignore # ignore / add / remove / force

# Add or remove space after the colon in message specs
# '[object setValue:1];' vs '[object setValue: 1];'
 sp_after_send_oc_colon = ignore # ignore / add / remove / force

# Add or remove space before the colon in message specs
# '[object setValue:1];' vs '[object setValue :1];'
 sp_before_send_oc_colon = ignore # ignore / add / remove / force

# Add or remove space after the (type) in message specs
# '-(int)f: (int) x;' vs '-(int)f: (int)x;'
 sp_after_oc_type = ignore # ignore / add / remove / force

# Add or remove space after the first (type) in message specs
# '-(int) f:(int)x;' vs '-(int)f:(int)x;'
 sp_after_oc_return_type = ignore # ignore / add / remove / force

# Add or remove space between '@selector' and '('
# '@selector(msgName)' vs '@selector (msgName)'
# Also applies to @protocol() constructs
 sp_after_oc_at_sel = ignore # ignore / add / remove / force

# Add or remove space between '@selector(x)' and the following word
# '@selector(foo) a:' vs '@selector(foo)a:'
 sp_after_oc_at_sel_parens = ignore # ignore / add / remove / force

# Add or remove space inside '@selector' parens
# '@selector(foo)' vs '@selector( foo )'
# Also applies to @protocol() constructs
 sp_inside_oc_at_sel_parens = ignore # ignore / add / remove / force

# Add or remove space before a block pointer caret
# '^int (int arg){...}' vs. ' ^int (int arg){...}'
 sp_before_oc_block_caret = ignore # ignore / add / remove / force

# Add or remove space after a block pointer caret
# '^int (int arg){...}' vs. '^ int (int arg){...}'
 sp_after_oc_block_caret = ignore # ignore / add / remove / force

# Add or remove space between the receiver and selector in a message.
# '[receiver selector ...]'
 sp_after_oc_msg_receiver = ignore # ignore / add / remove / force

# Add or remove space after @property.
 sp_after_oc_property = ignore # ignore / add / remove / force

# Add or remove space around the ':' in 'b ? t : f'
 sp_cond_colon = force # ignore / add / remove / force

# Add or remove space around the '?' in 'b ? t : f'
 sp_cond_question = force # ignore / add / remove / force

# Fix the spacing between 'case' and the label. Only 'ignore' and 'force' make sense here.
 sp_case_label = ignore # ignore / add / remove / force

# Control the space around the D '..' operator.
 sp_range = ignore # ignore / add / remove / force

# Control the spacing after ':' in 'for (TYPE VAR : EXPR)' (Java)
 sp_after_for_colon = ignore # ignore / add / remove / force

# Control the spacing before ':' in 'for (TYPE VAR : EXPR)' (Java)
 sp_before_for_colon = ignore # ignore / add / remove / force

# Control the spacing in 'extern (C)' (D)
 sp_extern_paren = ignore # ignore / add / remove / force

# Control the space after the opening of a C++ comment ' // A' vs '//A'
 sp_cmt_cpp_start = force # ignore / add / remove / force

# Controls the spaces between #else or #endif and a trailing comment
 sp_endif_cmt = ignore # ignore / add / remove / force

# Controls the spaces after 'new', 'delete', and 'delete[]'
 sp_after_new = force # ignore / add / remove / force

# Controls the spaces before a trailing or embedded comment
 sp_before_tr_emb_cmt = ignore # ignore / add / remove / force

# Number of spaces before a trailing or embedded comment
 sp_num_before_tr_emb_cmt = 1 # number

# Control space between a Java annotation and the open paren.
 sp_annotation_paren = ignore # ignore / add / remove / force

#
# Code alignment (not left column spaces/tabs)
#

# Whether to keep non-indenting tabs
 align_keep_tabs = true # false / true

# Whether to use tabs for aligning
 align_with_tabs = true # false / true

# Whether to bump out to the next tab when aligning
 align_on_tabstop = false # false / true

# Whether to left-align numbers
 align_number_left = false # false / true

# Whether to keep whitespace not required for alignment.
 align_keep_extra_space = false # false / true

# Align variable definitions in prototypes and functions
 align_func_params = false # false / true

# Align parameters in single-line functions that have the same name.
# The function names must already be aligned with each other.
 align_same_func_call_params = false # false / true

# The span for aligning variable definitions (0=don't align)
 align_var_def_span = 0 # number

# How to align the star in variable definitions.
# 0 =Part of the type 'void * foo;'
# 1 =Part of the variable 'void *foo;'
# 2 =Dangling 'void *foo;'
 align_var_def_star_style = 0 # number

# How to align the '&' in variable definitions.
# 0 =Part of the type
# 1 =Part of the variable
# 2 =Dangling
 align_var_def_amp_style = 0 # number

# The threshold for aligning variable definitions (0=no limit)
 align_var_def_thresh = 1 # number

# The gap for aligning variable definitions
 align_var_def_gap = 0 # number

# Whether to align the colon in struct bit fields
 align_var_def_colon = false # false / true

# Whether to align any attribute after the variable name
 align_var_def_attribute = false # false / true

# Whether to align inline struct/enum/union variable definitions
 align_var_def_inline = false # false / true

# The span for aligning on '=' in assignments (0=don't align)
 align_assign_span = 0 # number

# The threshold for aligning on '=' in assignments (0=no limit)
 align_assign_thresh = 1 # number

# The span for aligning on '=' in enums (0=don't align)
 align_enum_equ_span = 1 # number

# The threshold for aligning on '=' in enums (0=no limit)
 align_enum_equ_thresh = 0 # number

# The span for aligning struct/union (0=don't align)
 align_var_struct_span = 1 # number

# The threshold for aligning struct/union member definitions (0=no limit)
 align_var_struct_thresh = 0 # number

# The gap for aligning struct/union member definitions
 align_var_struct_gap = 0 # number

# The span for aligning struct initializer values (0=don't align)
 align_struct_init_span = 0 # number

# The minimum space between the type and the synonym of a typedef
 align_typedef_gap = 3 # number

# The span for aligning single-line typedefs (0=don't align)
 align_typedef_span = 0 # number

# How to align typedef'd functions with other typedefs
# 0 : Don't mix them at all
# 1 : align the open paren with the types
# 2 : align the function type name with the other type names
 align_typedef_func = 0 # number

# Controls the positioning of the '*' in typedefs. Just try it.
# 0 : Align on typedef type, ignore '*'
# 1 : The '*' is part of type name: typedef int *pint;
# 2 : The '*' is part of the type, but dangling: typedef int *pint;
 align_typedef_star_style = 0 # number

# Controls the positioning of the '&' in typedefs. Just try it.
# 0 : Align on typedef type, ignore '&'
# 1 : The '&' is part of type name: typedef int &pint;
# 2 : The '&' is part of the type, but dangling: typedef int &pint;
 align_typedef_amp_style = 0 # number

# The span for aligning comments that end lines (0=don't align)
 align_right_cmt_span = 0 # number

# If aligning comments, mix with comments after '}' and #endif with less than 3 spaces before the comment
 align_right_cmt_mix = false # false / true

# If a trailing comment is more than this number of columns away from the text it follows,
# it will qualify for being aligned. This has to be > 0 to do anything.
 align_right_cmt_gap = 0 # number

# Align trailing comment at or beyond column N; 'pulls in' comments as a bonus side effect (0=ignore)
 align_right_cmt_at_col = 0 # number

# The span for aligning function prototypes (0=don't align)
 align_func_proto_span = 0 # number

# Minimum gap between the return type and the function name.
 align_func_proto_gap = 0 # number

# Align function protos on the 'operator' keyword instead of what follows
 align_on_operator = false # false / true

# Whether to mix aligning prototype and variable declarations.
# If true, align_var_def_XXX options are used instead of align_func_proto_XXX options.
 align_mix_var_proto = false # false / true

# Align single-line functions with function prototypes, uses align_func_proto_span
 align_single_line_func = false # false / true

# Aligning the open brace of single-line functions.
# Requires align_single_line_func=true, uses align_func_proto_span
 align_single_line_brace = false # false / true

# Gap for align_single_line_brace.
 align_single_line_brace_gap = 0 # number

# The span for aligning ObjC msg spec (0=don't align)
 align_oc_msg_spec_span = 0 # number

# Whether to align macros wrapped with a backslash and a newline.
# This will not work right if the macro contains a multi-line comment.
 align_nl_cont = true # false / true

# # Align macro functions and variables together
 align_pp_define_together = false # false / true

# The minimum space between label and value of a preprocessor define
 align_pp_define_gap = 4 # number

# The span for aligning on '#define' bodies (0=don't align)
 align_pp_define_span = 3 # number

# Align lines that start with '<<' with previous '<<'. Default=true
 align_left_shift = true # false / true

# Span for aligning parameters in an Obj-C message call on the ':' (0=don't align)
 align_oc_msg_colon_span = 0 # number

# If true, always align with the first parameter, even if it is too short.
 align_oc_msg_colon_first = false # false / true

# Aligning parameters in an Obj-C '+' or '-' declaration on the ':'
 align_oc_decl_colon = false # false / true

#
# Newline adding and removing options
#

# Whether to collapse empty blocks between '{' and '}'
 nl_collapse_empty_body = false # false / true

# Don 't split one-line braced assignments - 'foo_t f = { 1, 2 };'
 nl_assign_leave_one_liners = true # false / true

# Don 't split one-line braced statements inside a class xx { } body
 nl_class_leave_one_liners = true # false / true

# Don 't split one-line enums: 'enum foo { BAR = 15 };'
 nl_enum_leave_one_liners = false # false / true

# Don 't split one-line get or set functions
 nl_getset_leave_one_liners = false # false / true

# Don 't split one-line function definitions - 'int foo() { return 0; }'
 nl_func_leave_one_liners = false # false / true

# Don 't split one-line C++11 lambdas - '[]() { return 0; }'
 nl_cpp_lambda_leave_one_liners = false # false / true

# Don 't split one-line if/else statements - 'if(a) b++;'
 nl_if_leave_one_liners = false # false / true

# Don 't split one-line OC messages
 nl_oc_msg_leave_one_liner = false # false / true

# Add or remove newlines at the start of the file
 nl_start_of_file = remove # ignore / add / remove / force

# The number of newlines at the start of the file (only used if nl_start_of_file is 'add' or 'force'
 nl_start_of_file_min = 0 # number

# Add or remove newline at the end of the file
 nl_end_of_file = force # ignore / add / remove / force

# The number of newlines at the end of the file (only used if nl_end_of_file is 'add' or 'force')
 nl_end_of_file_min = 1 # number

# Add or remove newline between '=' and '{'
 nl_assign_brace = force # ignore / add / remove / force

# Add or remove newline between '=' and '[' (D only)
 nl_assign_square = ignore # ignore / add / remove / force

# Add or remove newline after '= [' (D only). Will also affect the newline before the ']'
 nl_after_square_assign = ignore # ignore / add / remove / force

# The number of blank lines after a block of variable definitions at the top of a function body
# 0 = No change (default)
 nl_func_var_def_blk = 1 # number

# The number of newlines before a block of typedefs
# 0 = No change (default)
 nl_typedef_blk_start = 0 # number

# The number of newlines after a block of typedefs
# 0 = No change (default)
 nl_typedef_blk_end = 0 # number

# The maximum consecutive newlines within a block of typedefs
# 0 = No change (default)
 nl_typedef_blk_in = 0 # number

# The number of newlines before a block of variable definitions not at the top of a function body
# 0 = No change (default)
 nl_var_def_blk_start = 0 # number

# The number of newlines after a block of variable definitions not at the top of a function body
# 0 = No change (default)
 nl_var_def_blk_end = 0 # number

# The maximum consecutive newlines within a block of variable definitions
# 0 = No change (default)
 nl_var_def_blk_in = 2 # number

# Add or remove newline between a function call's ')' and '{', as in:
# list_for_each (item, &list) { }
 nl_fcall_brace = remove # ignore / add / remove / force

# Add or remove newline between 'enum' and '{'
 nl_enum_brace = remove # ignore / add / remove / force

# Add or remove newline between 'struct and '{'
 nl_struct_brace = remove # ignore / add / remove / force

# Add or remove newline between 'union' and '{'
 nl_union_brace = remove # ignore / add / remove / force

# Add or remove newline between 'if' and '{'
 nl_if_brace = remove # ignore / add / remove / force

# Add or remove newline between '}' and 'else'
 nl_brace_else = remove # ignore / add / remove / force

# Add or remove newline between 'else if' and '{'
# If set to ignore, nl_if_brace is used instead
 nl_elseif_brace = ignore # ignore / add / remove / force

# Add or remove newline between 'else' and '{'
 nl_else_brace = remove # ignore / add / remove / force

# Add or remove newline between 'else' and 'if'
 nl_else_if = remove # ignore / add / remove / force

# Add or remove newline between '}' and 'finally'
 nl_brace_finally = remove # ignore / add / remove / force

# Add or remove newline between 'finally' and '{'
 nl_finally_brace = remove # ignore / add / remove / force

# Add or remove newline between 'try' and '{'
 nl_try_brace = remove # ignore / add / remove / force

# Add or remove newline between get/set and '{'
 nl_getset_brace = remove # ignore / add / remove / force

# Add or remove newline between 'for' and '{'
 nl_for_brace = remove # ignore / add / remove / force

# Add or remove newline between 'catch' and '{'
 nl_catch_brace = remove # ignore / add / remove / force

# Add or remove newline between '}' and 'catch'
 nl_brace_catch = remove # ignore / add / remove / force

# Add or remove newline between 'while' and '{'
 nl_while_brace = remove # ignore / add / remove / force

# Add or remove newline between 'scope (x)' and '{' (D)
 nl_scope_brace = ignore # ignore / add / remove / force

# Add or remove newline between 'unittest' and '{' (D)
 nl_unittest_brace = ignore # ignore / add / remove / force

# Add or remove newline between 'version (x)' and '{' (D)
 nl_version_brace = ignore # ignore / add / remove / force

# Add or remove newline between 'using' and '{'
 nl_using_brace = remove # ignore / add / remove / force

# Add or remove newline between two open or close braces.
# Due to general newline/brace handling, REMOVE may not work.
 nl_brace_brace = remove # ignore / add / remove / force

# Add or remove newline between 'do' and '{'
 nl_do_brace = remove # ignore / add / remove / force

# Add or remove newline between '}' and 'while' of 'do' statement
 nl_brace_while = remove # ignore / add / remove / force

# Add or remove newline between 'switch' and '{'
 nl_switch_brace = remove # ignore / add / remove / force

# Add a newline between ')' and '{' if the ')' is on a different line than the if/for/etc.
# Overrides nl_for_brace, nl_if_brace, nl_switch_brace, nl_while_switch, and nl_catch_brace.
 nl_multi_line_cond = false # false / true

# Force a newline in a define after the macro name for multi-line defines.
 nl_multi_line_define = true # false / true

# Whether to put a newline before 'case' statement
 nl_before_case = true # false / true

# Add or remove newline between ')' and 'throw'
 nl_before_throw = force # ignore / add / remove / force

# Whether to put a newline after 'case' statement
 nl_after_case = true # false / true

# Add or remove a newline between a case ':' and '{'. Overrides nl_after_case.
 nl_case_colon_brace = remove # ignore / add / remove / force

# Newline between namespace and {
 nl_namespace_brace = remove # ignore / add / remove / force

# Add or remove newline between 'template<>' and whatever follows.
 nl_template_class = force # ignore / add / remove / force

# Add or remove newline between 'class' and '{'
 nl_class_brace = remove # ignore / add / remove / force

# Add or remove newline after each ',' in the constructor member initialization
 nl_class_init_args = remove # ignore / add / remove / force

# Add or remove newline between return type and function name in a function definition
 nl_func_type_name = remove # ignore / add / remove / force

# Add or remove newline between return type and function name inside a class {}
# Uses nl_func_type_name or nl_func_proto_type_name if set to ignore.
 nl_func_type_name_class = remove # ignore / add / remove / force

# Add or remove newline between function scope and name in a definition
# Controls the newline after '::' in 'void A::f() { }'
 nl_func_scope_name = remove # ignore / add / remove / force

# Add or remove newline between return type and function name in a prototype
 nl_func_proto_type_name = remove # ignore / add / remove / force

# Add or remove newline between a function name and the opening '('
 nl_func_paren = remove # ignore / add / remove / force

# Add or remove newline between a function name and the opening '(' in the definition
 nl_func_def_paren = remove # ignore / add / remove / force

# Add or remove newline after '(' in a function declaration
 nl_func_decl_start = remove # ignore / add / remove / force

# Add or remove newline after '(' in a function definition
 nl_func_def_start = remove # ignore / add / remove / force

# Overrides nl_func_decl_start when there is only one parameter.
 nl_func_decl_start_single = ignore # ignore / add / remove / force

# Overrides nl_func_def_start when there is only one parameter.
 nl_func_def_start_single = ignore # ignore / add / remove / force

# Add or remove newline after each ',' in a function declaration
 nl_func_decl_args = remove # ignore / add / remove / force

# Add or remove newline after each ',' in a function definition
 nl_func_def_args = remove # ignore / add / remove / force

# Add or remove newline before the ')' in a function declaration
 nl_func_decl_end = remove # ignore / add / remove / force

# Add or remove newline before the ')' in a function definition
 nl_func_def_end = remove # ignore / add / remove / force

# Overrides nl_func_decl_end when there is only one parameter.
 nl_func_decl_end_single = ignore # ignore / add / remove / force

# Overrides nl_func_def_end when there is only one parameter.
 nl_func_def_end_single = ignore # ignore / add / remove / force

# Add or remove newline between '()' in a function declaration.
 nl_func_decl_empty = remove # ignore / add / remove / force

# Add or remove newline between '()' in a function definition.
 nl_func_def_empty = remove # ignore / add / remove / force

# Whether to put each OC message parameter on a separate line
# See nl_oc_msg_leave_one_liner
 nl_oc_msg_args = false # false / true

# Add or remove newline between function signature and '{'
 nl_fdef_brace = remove # ignore / add / remove / force

# Add or remove newline between C++11 lambda signature and '{'
 nl_cpp_ldef_brace = ignore # ignore / add / remove / force

# Add or remove a newline between the return keyword and return expression.
 nl_return_expr = remove # ignore / add / remove / force

# Whether to put a newline after semicolons, except in 'for' statements
 nl_after_semicolon = true # false / true

# Whether to put a newline after brace open.
# This also adds a newline before the matching brace close.
 nl_after_brace_open = true # false / true

# If nl_after_brace_open and nl_after_brace_open_cmt are true, a newline is
# placed between the open brace and a trailing single-line comment.
 nl_after_brace_open_cmt = true # false / true

# Whether to put a newline after a virtual brace open with a non-empty body.
# These occur in un-braced if/while/do/for statement bodies.
 nl_after_vbrace_open = false # false / true

# Whether to put a newline after a virtual brace open with an empty body.
# These occur in un-braced if/while/do/for statement bodies.
 nl_after_vbrace_open_empty = false # false / true

# Whether to put a newline after a brace close.
# Does not apply if followed by a necessary ';'.
 nl_after_brace_close = true # false / true

# Whether to put a newline after a virtual brace close.
# Would add a newline before return in: 'if (foo) a++; return;'
 nl_after_vbrace_close = false # false / true

# Control the newline between the close brace and 'b' in: 'struct { int a; } b;'
# Affects enums, unions, and structures. If set to ignore, uses nl_after_brace_close
 nl_brace_struct_var = remove # ignore / add / remove / force

# Whether to alter newlines in '#define' macros
 nl_define_macro = false # false / true

# Whether to not put blanks after '#ifxx', '#elxx', or before '#endif'
 nl_squeeze_ifdef = false # false / true

# Add or remove blank line before 'if'
 nl_before_if = force # ignore / add / remove / force

# Add or remove blank line after 'if' statement
 nl_after_if = force # ignore / add / remove / force

# Add or remove blank line before 'for'
 nl_before_for = force # ignore / add / remove / force

# Add or remove blank line after 'for' statement
 nl_after_for = force # ignore / add / remove / force

# Add or remove blank line before 'while'
 nl_before_while = force # ignore / add / remove / force

# Add or remove blank line after 'while' statement
 nl_after_while = force # ignore / add / remove / force

# Add or remove blank line before 'switch'
 nl_before_switch = force # ignore / add / remove / force

# Add or remove blank line after 'switch' statement
 nl_after_switch = force # ignore / add / remove / force

# Add or remove blank line before 'do'
 nl_before_do = force # ignore / add / remove / force

# Add or remove blank line after 'do/while' statement
 nl_after_do = force # ignore / add / remove / force

# Whether to double-space commented-entries in struct/enum
 nl_ds_struct_enum_cmt = false # false / true

# Whether to double-space before the close brace of a struct/union/enum
# ( lower priority than 'eat_blanks_before_close_brace')
 nl_ds_struct_enum_close_brace = false # false / true

# Add or remove a newline around a class colon.
# Related to pos_class_colon, nl_class_init_args, and pos_comma.
 nl_class_colon = remove # ignore / add / remove / force

# Change simple unbraced if statements into a one-liner
# 'if(b)\n i++;' => 'if(b) i++;'
 nl_create_if_one_liner = false # false / true

# Change simple unbraced for statements into a one-liner
# 'for (i=0;i<5;i++)\n foo(i);' => 'for (i=0;i<5;i++) foo(i);'
 nl_create_for_one_liner = false # false / true

# Change simple unbraced while statements into a one-liner
# 'while (i<5)\n foo(i++);' => 'while (i<5) foo(i++);'
 nl_create_while_one_liner = false # false / true

#
# Positioning options
#

# The position of arithmetic operators in wrapped expressions
 pos_arith = ignore # ignore / join / lead / lead_break / lead_force / trail / trail_break / trail_force

# The position of assignment in wrapped expressions.
# Do not affect '=' followed by '{'
 pos_assign = ignore # ignore / join / lead / lead_break / lead_force / trail / trail_break / trail_force

# The position of boolean operators in wrapped expressions
 pos_bool = trail # ignore / join / lead / lead_break / lead_force / trail / trail_break / trail_force

# The position of comparison operators in wrapped expressions
 pos_compare = ignore # ignore / join / lead / lead_break / lead_force / trail / trail_break / trail_force

# The position of conditional (b ? t : f) operators in wrapped expressions
 pos_conditional = ignore # ignore / join / lead / lead_break / lead_force / trail / trail_break / trail_force

# The position of the comma in wrapped expressions
 pos_comma = ignore # ignore / join / lead / lead_break / lead_force / trail / trail_break / trail_force

# The position of the comma in the constructor initialization list
 pos_class_comma = ignore # ignore / join / lead / lead_break / lead_force / trail / trail_break / trail_force

# The position of colons between constructor and member initialization
 pos_class_colon = ignore # ignore / join / lead / lead_break / lead_force / trail / trail_break / trail_force

#
# Line Splitting options
#

# Try to limit code width to N number of columns
 code_width = 0 # number

# Whether to fully split long 'for' statements at semi-colons
 ls_for_split_full = false # false / true

# Whether to fully split long function protos/calls at commas
 ls_func_split_full = false # false / true

# Whether to split lines as close to code_width as possible and ignore some groupings
 ls_code_width = false # false / true

#
# Blank line options
#

# The maximum consecutive newlines
 nl_max = 2 # number

# The number of newlines after a function prototype, if followed by another function prototype
 nl_after_func_proto = 1 # number

# The number of newlines after a function prototype, if not followed by another function prototype
 nl_after_func_proto_group = 1 # number

# The number of newlines after '}' of a multi-line function body
 nl_after_func_body = 2 # number

# The number of newlines after '}' of a multi-line function body in a class declaration
 nl_after_func_body_class = 2 # number

# The number of newlines after '}' of a single line function body
 nl_after_func_body_one_liner = 0 # number

# The minimum number of newlines before a multi-line comment.
# Doesn 't apply if after a brace open or another multi-line comment.
 nl_before_block_comment = 2 # number

# The minimum number of newlines before a single-line C comment.
# Doesn 't apply if after a brace open or other single-line C comments.
 nl_before_c_comment = 0 # number

# The minimum number of newlines before a CPP comment.
# Doesn 't apply if after a brace open or other CPP comments.
 nl_before_cpp_comment = 2 # number

# Whether to force a newline after a multi-line comment.
 nl_after_multiline_comment = false # false / true

# The number of newlines after '}' or ';' of a struct/enum/union definition
 nl_after_struct = 2 # number

# The number of newlines after '}' or ';' of a class definition
 nl_after_class = 2 # number

# The number of newlines before a 'private:', 'public:', 'protected:', 'signals:', or 'slots:' label.
# Will not change the newline count if after a brace open.
# 0 = No change.
 nl_before_access_spec = 0 # number

# The number of newlines after a 'private:', 'public:', 'protected:', 'signals:', or 'slots:' label.
# 0 = No change.
 nl_after_access_spec = 1 # number

# The number of newlines between a function def and the function comment.
# 0 = No change.
 nl_comment_func_def = 1 # number

# The number of newlines after a try-catch-finally block that isn't followed by a brace close.
# 0 = No change.
 nl_after_try_catch_finally = 0 # number

# The number of newlines before and after a property, indexer or event decl.
# 0 = No change.
 nl_around_cs_property = 0 # number

# The number of newlines between the get/set/add/remove handlers in C#.
# 0 = No change.
 nl_between_get_set = 0 # number

# Add or remove newline between C# property and the '{'
 nl_property_brace = ignore # ignore / add / remove / force

# Whether to remove blank lines after '{'
 eat_blanks_after_open_brace = false # false / true

# Whether to remove blank lines before '}'
 eat_blanks_before_close_brace = false # false / true

# How aggressively to remove extra newlines not in preproc.
# 0 : No change
# 1 : Remove most newlines not handled by other config
# 2 : Remove all newlines and reformat completely by config
 nl_remove_extra_newlines = 1 # number

# Whether to put a blank line before 'return' statements, unless after an open brace.
 nl_before_return = false # false / true

# Whether to put a blank line after 'return' statements, unless followed by a close brace.
 nl_after_return = true # false / true

# Whether to put a newline after a Java annotation statement.
# Only affects annotations that are after a newline.
 nl_after_annotation = ignore # ignore / add / remove / force

# Controls the newline between two annotations.
 nl_between_annotation = ignore # ignore / add / remove / force

#
# Code modifying options (non-whitespace)
#

# Add or remove braces on single-line 'do' statement
 mod_full_brace_do = remove # ignore / add / remove / force

# Add or remove braces on single-line 'for' statement
 mod_full_brace_for = remove # ignore / add / remove / force

# Add or remove braces on single-line function definitions. (Pawn)
 mod_full_brace_function = force # ignore / add / remove / force

# Add or remove braces on single-line 'if' statement. Will not remove the braces if they contain an 'else'.
 mod_full_brace_if = remove # ignore / add / remove / force

# Make all if/elseif/else statements in a chain be braced or not. Overrides mod_full_brace_if.
# If any must be braced, they are all braced. If all can be unbraced, then the braces are removed.
 mod_full_brace_if_chain = true # false / true

# Don 't remove braces around statements that span N newlines
 mod_full_brace_nl = 0 # number

# Add or remove braces on single-line 'while' statement
 mod_full_brace_while = remove # ignore / add / remove / force

# Add or remove braces on single-line 'using ()' statement
 mod_full_brace_using = ignore # ignore / add / remove / force

# Add or remove unnecessary paren on 'return' statement
 mod_paren_on_return = remove # ignore / add / remove / force

# Whether to change optional semicolons to real semicolons
 mod_pawn_semicolon = false # false / true

# Add parens on 'while' and 'if' statement around bools
 mod_full_paren_if_bool = true # false / true

# Whether to remove superfluous semicolons
 mod_remove_extra_semicolon = true # false / true

# If a function body exceeds the specified number of newlines and doesn't have a comment after
# the close brace, a comment will be added.
 mod_add_long_function_closebrace_comment = 0 # number

# If a switch body exceeds the specified number of newlines and doesn't have a comment after
# the close brace, a comment will be added.
 mod_add_long_switch_closebrace_comment = 0 # number

# If an #ifdef body exceeds the specified number of newlines and doesn't have a comment after
# the #endif, a comment will be added.
 mod_add_long_ifdef_endif_comment = 1 # number

# If an #ifdef or #else body exceeds the specified number of newlines and doesn't have a comment after
# the #else, a comment will be added.
 mod_add_long_ifdef_else_comment = 1 # number

# If TRUE, will sort consecutive single-line 'import' statements [Java, D]
 mod_sort_import = false # false / true

# If TRUE, will sort consecutive single-line 'using' statements [C#]
 mod_sort_using = false # false / true

# If TRUE, will sort consecutive single-line '#include' statements [C/C++] and '#import' statements [Obj-C]
# This is generally a bad idea, as it may break your code.
 mod_sort_include = false # false / true

# If TRUE, it will move a 'break' that appears after a fully braced 'case' before the close brace.
 mod_move_case_break = false # false / true

# Will add or remove the braces around a fully braced case statement.
# Will only remove the braces if there are no variable declarations in the block.
 mod_case_brace = remove # ignore / add / remove / force

# If TRUE, it will remove a void 'return;' that appears as the last statement in a function.
 mod_remove_empty_return = true # false / true

#
# Comment modifications
#

# Try to wrap comments at cmt_width columns
 cmt_width = 0 # number

# Set the comment reflow mode (default: 0)
# 0 : no reflowing (apart from the line wrapping due to cmt_width)
# 1 : no touching at all
# 2 : full reflow
 cmt_reflow_mode = 0 # number

# If false, disable all multi-line comment changes, including cmt_width. keyword substitution, and leading chars.
# Default is true.
 cmt_indent_multi = true # false / true

# Whether to group c-comments that look like they are in a block
 cmt_c_group = false # false / true

# Whether to put an empty '/*' on the first line of the combined c-comment
 cmt_c_nl_start = false # false / true

# Whether to put a newline before the closing '*/' of the combined c-comment
 cmt_c_nl_end = false # false / true

# Whether to group cpp-comments that look like they are in a block
 cmt_cpp_group = false # false / true

# Whether to put an empty '/*' on the first line of the combined cpp-comment
 cmt_cpp_nl_start = false # false / true

# Whether to put a newline before the closing '*/' of the combined cpp-comment
 cmt_cpp_nl_end = false # false / true

# Whether to change cpp-comments into c-comments
 cmt_cpp_to_c = false # false / true

# Whether to put a star on subsequent comment lines
 cmt_star_cont = true # false / true

# The number of spaces to insert at the start of subsequent comment lines
 cmt_sp_before_star_cont = 0 # number

# The number of spaces to insert after the star on subsequent comment lines
 cmt_sp_after_star_cont = 0 # number

# For multi-line comments with a '*' lead, remove leading spaces if the first and last lines of
# the comment are the same length. Default=True
 cmt_multi_check_last = true # false / true

# The filename that contains text to insert at the head of a file if the file doesn't start with a C/C++ comment.
# Will substitute $(filename) with the current file's name.
 cmt_insert_file_header = "" # string

# The filename that contains text to insert at the end of a file if the file doesn't end with a C/C++ comment.
# Will substitute $(filename) with the current file's name.
 cmt_insert_file_footer = "" # string

# The filename that contains text to insert before a function implementation if the function isn't preceded with a C/C++ comment.
# Will substitute $(function) with the function name and $(javaparam) with the javadoc @param and @return stuff.
# Will also substitute $(fclass) with the class name: void CFoo::Bar() { ... }
 cmt_insert_func_header = "" # string

# The filename that contains text to insert before a class if the class isn't preceded with a C/C++ comment.
# Will substitute $(class) with the class name.
 cmt_insert_class_header = "" # string

# The filename that contains text to insert before a Obj-C message specification if the method isn't preceeded with a C/C++ comment.
# Will substitute $(message) with the function name and $(javaparam) with the javadoc @param and @return stuff.
 cmt_insert_oc_msg_header = "" # string

# If a preprocessor is encountered when stepping backwards from a function name, then
# this option decides whether the comment should be inserted.
# Affects cmt_insert_oc_msg_header, cmt_insert_func_header and cmt_insert_class_header.
 cmt_insert_before_preproc = false # false / true

#
# Preprocessor options
#

# Control indent of preprocessors inside #if blocks at brace level 0
 pp_indent = remove # ignore / add / remove / force

# Whether to indent #if/#else/#endif at the brace level (true) or from column 1 (false)
 pp_indent_at_level = false # false / true

# If pp_indent_at_level=false, specifies the number of columns to indent per level. Default=1.
 pp_indent_count = 1 # number

# Add or remove space after # based on pp_level of #if blocks
 pp_space = ignore # ignore / add / remove / force

# Sets the number of spaces added with pp_space
 pp_space_count = 0 # number

# The indent for #region and #endregion in C# and '#pragma region' in C/C++
 pp_indent_region = 0 # number

# Whether to indent the code between #region and #endregion
 pp_region_indent_code = false # false / true

# If pp_indent_at_level=true, sets the indent for #if, #else, and #endif when not at file-level
 pp_indent_if = 0 # number

# Control whether to indent the code between #if, #else and #endif when not at file-level
 pp_if_indent_code = false # false / true

# Whether to indent '#define' at the brace level (true) or from column 1 (false)
 pp_define_at_level = false # false / true

# You can force a token to be a type with the 'type' option.
# Example :
# type myfoo1 myfoo2
#
# You can create custom macro-based indentation using macro-open,
# macro -else and macro-close.
# Example :
# macro -open BEGIN_TEMPLATE_MESSAGE_MAP
# macro -open BEGIN_MESSAGE_MAP
# macro -close END_MESSAGE_MAP
#
# You can assign any keyword to any type with the set option.
# set func_call_user _ N_
#
# The full syntax description of all custom definition config entries
# is shown below:
#
# define custom tokens as :
# - embed whitespace in token using '' escape character, or
# put token in quotes
# - these: ' " and ` are recognized as quote delimiters
#
# type token1 token2 token3 ...
# ^ optionally specify multiple tokens on a single line
# define def_token output_token
# ^ output_token is optional, then NULL is assumed
# macro -open token
# macro -close token
# macro -else token
# set id token1 token2 ...
# ^ optionally specify multiple tokens on a single line
# ^ id is one of the names in token_enum.h sans the CT_ prefix,
# e .g. PP_PRAGMA
#
# all tokens are separated by any mix of ',' commas, '=' equal signs
# and whitespace (space, tab)
#